Combination Budd wheel nut socket. Extra deep design for removal of nut / stud. Impact grade for use with impact wrenches.

Primary applications include front / rear axles on Japanese trucks - Isuzu NPR (front & rear) | Mitsubishi Fuso | Hino | Toyota Dyna/ Dynaps (rear) & Dyna/ Rino (front).

• Budd wheel nut socket
• 21mm square (4 Pt) x 41mm hex
• Impact grade (Chrome Moly)
• 3/4" Sq Drv

A specialised tool for quickly / safely installing rear oil seals on Isuzu trucks with 4JJ1 engines. An essential tool to avoid damaging oil seals during installation.

This tool is designed to suit a wide range of late model Isuzu vehicles with 4JJ1 engines. For earlier model vehicles, refer ET1261A.

• Genuine oil seals: 8-97071-561-1 | BZ4962E
• Applications: 3.5T 4JB1 | 4JG2 | 4JH1 | 4JJ1 130HP / 150HP
• Chassis: NKR69 (4JG2) (94-) | NKR77 (4JH1-TC (02-) | NLR85 (4JJ1-TCS) (08-) | NNR85 (4JJ1-TCS) (08-)

Remove practically all types of lock nuts (INCLUDING those with rotating collars).

Place the supplied disposable key into the chamber and strike. The key will mould to the lock nut shape creating a temporary key to remove the lock nut.

• Creates a lock nut in under 3 minutes
• Includes a shield to protect the wheels from damage.
• Supplied with 3x key cutters (single use). Additional cutters are available separately.
• A real time saving tool!
• Replacement Cutters (5 Pack) ET6066-C5PK

Professional quality tester for late model trucks fitted with 7 pin type sockets. These testers are designed for testing the vehicle side socket, not the trailer itself.

There are 2 versions - for either 24N / 24S sockets.

• CANbus compatible.
• 4m cable to allow the unit to be used in the cabin.

This product is designed for use in monitoring car battery voltage, leakage current, and serving as a backup power supply when replacing the battery. The product is connected to the car's OBDII interface via an OBDII connection cable to supply 12V power to the car and monitor the car system's leakage current for diagnosing various faults. It can also serve as a backup power supply for the car during battery replacement, preventing the car's mainboard from losing power and data. Draw Monitor can also monitor battery voltage through the OBDII port. Please read the instruction manual carefully before using the product.

• Supplies up to 10 amps
• Connects via OBDII
• View and record data via Bluetooth on App
• USB-C rechargeable
• Adjustable current output alarm & adjustable auto power off setting
• Graphing mode
• Monitor function input: 0-30V
• Voltage display accuracy: 1%+5dig resolution 0.1V
• Current display accuracy: 3%+5dig resolution 1mA

Remove guesswork from modern vehicle diagnostics by putting every OBDII circuit at your fingertips. This professional breakout box gives technicians instant access to every OBDII circuit for faster fault finding, ECU testing, and network diagnostics. Whether you're diagnosing communication faults, testing CAN bus systems, performing ECU bench testing, or verifying vehicle power and ground circuits, the ET3142 provides the visibility and control that standard scan tools simply can't offer.

Featuring a built-in LCD display with real-time True RMS voltage monitoring across all 16 OBD-II pins, the ET3142 allows technicians to instantly identify power supply issues, ground faults, CAN communication activity, and wiring problems without repeatedly probing connectors. Dynamic signal detection, audible voltage alarms, and ground status indicators help reduce diagnostic time and improve accuracy.

The integrated 120 CAN termination switches make the ET3142 an invaluable tool for ECU bench testing and module diagnostics. By providing proper CAN network termination, technicians can test modules off the vehicle with improved signal integrity and confidence. Compatible with both 12V and 24V systems, it is suitable for passenger vehicles, trucks, buses, and commercial equipment.

• Real Time VRMS Voltage Monitoring - displays real time True RMS voltage on all 16 OBDII pins
• Built In CAN Termination for Bench & ECU Testing - an onboard 120 ohm CAN termination switch is ideal for situations where termination is missing such as single ECU or small bench networks.
• Intelligent Voltage Protection & Audible Alarm System - reverse polarity protection, automatic alarms for over voltage and under voltage conditions, and support for currents up to 2A, ensures that both the vehicle and diagnostic tools stay protected during testing.

Replacement battery cable clamp for the ET2709 code reader / battery tester.

• 14 Pin Benz connector

• 20 Pin Isuzu connector

• 3 Pin Isuzu connector

• 30 Pin Iveco connector