Caution: This cable is designed for Doosan Machinery ONLY. While it shares a 14 pin plug similar to the CanDo 14 Pin Benz Connector (ET2608-08), the Doosan application has an inverted ground. Use on early Mercedes Benz vehicles will directly short the supply line to ground. For further information, refer to the Cando Connector companion, or contact [email protected]

This is an OPTIONAL connector, and is not supplied as part of the standard ET2608 kit.

• Applications: Doosan HD only (not Mercedes).
• 14 pin connector
• 38cm overall length

An optional diagnostic cable for the CanDo Pro Tab heavy duty scan tool. This connector features a standard 9 pin diesel connector, but with a connector that can lock onto the diagnostic port to avoid coming loose especially during road tests.

• 9 Pin round connector
• Straight connector, with locking mechanism

An optional diagnostic cable for the CanDo Pro Tab heavy duty scan tool. This connector features a standard 9 pin diesel connector, but with a right angle connector that can lock onto the diagnostic port to avoid coming loose especially during road tests.

• 9 Pin round connector
• Right angle connector, with locking mechanism

Measures Visual Light Transmission (VLT) through windows treated with aftermarket window tint film. Each probe has a magnet that will hold against the glass for measurement.

• Two piece design allows users to check all windows on vehicle, including all fixed windows.
• Essential testing tool for vehicle inspections.
• 4x AAA batteries included.

Heavy vehicles require higher capacity smoke machines. The new SmokeMan HD delivers up to 120 PSI max pressure. Test more than just engines. Check for leaks on small water tanks etc...

However, please note that smoke (mineral oil and / or UV dyes) must not be injected into braking systems.

• Both flow and pressure control
• Up to 120 PSI max pressure (compressed air required)
• Heavy vehicle adaptor set included
• Dual gauges - Test and System Pressure
• 12 month warranty

Accurately identify faults in the oxygen sensor and catalytic systems. 5 gas for petrol & diesel. Kane gas analysers - made in the UK - are market leaders. These compact, fully portable units, can be taken to the vehicle and used on test drives to log emission data.

• 4 gas (CO / CO2 / HC / O2 & Lambda / AFR) for petrol engines.
• 5 gas adds NOx, to test diesel emissions.
• Rechargeable battery
• Fast warm up
• Print to PC via wireless, or to Android App
• Updated model

Save time, avoid costly component replacement, and restore damaged NOx sensor threads with the Endeavour ET2218 NOx Sensor Tap Set. Designed specifically for servicing NOx sensor ports in modern exhaust after-treatment systems, this specialist kit allows technicians to clean and repair damaged threads, helping ensure correct sensor installation and accurate emissions system operation.

This kit provides the correct taps to restore thread integrity quickly and professionally, reducing downtime and helping avoid expensive repairs.

• Applications include: Ford EcoBlue | Mercedes
• M20 x 1.5 | M22 x 1.5 threads
• 48mm overall length
• Made from Titanium coated Chrome Moly
• Use with axle grease to catch any removed metal in the threads.

Make Hino Euro 6 oil filter servicing faster, easier, and damage-free with the Endeavour ET2018A-54 Oil Filter wrench. Specifically engineered for Hino Euro 6 11-tonne diesel engines, this specialist 113mm filter wrench provides a precise fit for safe and efficient removal and installation of the oil filter housing.

• Application: Hino Euro 6
• 113mm diameter

The ET8626 is a professional battery and charging-system tester designed for fast, accurate assessment of all 12V automotive lead acid cranking batteries - including modern stop-start types, and for evaluating 12V and 24V alternator and starting system performance. This tester delivers clear, reliable diagnostics in seconds, and the built-in thermal printer allows you to produce instant test reports for customer records or workshop documentation.

• Compatible With All Major Battery Standards - accurately tests batteries across all common industry standards, ensuring reliable results whether you're working with automotive, commercial, marine, or deep cycle 12V batteries.
• High Load Voltage Testing for 12V & 24V Systems - maximum load voltage tests on both 12 volt and 24 volt electrical systems, making it suitable for cars, trucks, machinery, and mixed fleet applications.
• Built In Short Circuit & Reverse Polarity Protection - integrated safety features to prevent damage to the tester and the battery, even if connections are made incorrectly.
• Wide 100–2,000 CCA Testing Range - enabling accurate assessments of everything from small passenger batteries to heavy duty commercial units.

The SmokeMan ET4396 is a compact, high-performance pressure brake designed for fast, clean, and reliable brake fluid exchange. This unit streamlines brake bleeding, allowing it to be undertaken by one person - no need for a second technician. Powered by the vehicle's own battery - no shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.
• Includes premium adaptor kit

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

Professional quality tester for late model trucks fitted with 7 pin type sockets. These testers are designed for testing the vehicle side socket, not the trailer itself.

There are 2 versions - for either 24N / 24S sockets.

• CANbus compatible.
• 4m cable to allow the unit to be used in the cabin.

Professional quality tester for late model trucks fitted with 7 pin type sockets. These testers are designed for testing the vehicle side socket, not the trailer itself.

There are 2 versions - for either 24N / 24S sockets.

• CANbus compatible.
• 4m cable to allow the unit to be used in the cabin.

Achieve perfect torque every time with this versatile and reliable torque adapter. The ET1234 Torque Adapter is a precision tool designed to prevent over-tightening of delicate components, such as plastic and aluminum oil filter canisters and filters, and sump plugs etc. It converts any 3/8" drive ratchet or breaker bar into a 25 Nm torque wrench, ensuring accurate tightening to manufacturer specifications.

• Accurate Torque Control: Converts any 3/8" drive ratchet or breaker bar into a precise 25 Nm torque wrench. Protect components from damage caused by over tightening.
• Durable Construction: Built with high-quality materials to ensure long-lasting performance.
• User-Friendly Design: Simple to attach and use with a 3/8" drive tool.
• Not for use with impact / pneumatic tools.