Camshaft setting bars for locking the camshaft when servicing the camshaft timing chain on select Audi / VW vehicles. Commonly used in VW VR6 / W8 / W12 engines.

• OEM equiv: T10068A
• Use in conjunction with ET1105A-4

Oil pump locking tool for 2.0L, 2.2L, 2.4L, 3.2L diesel engines and 2.3L Duratec petrol engines.

Allows the oil pump to be removed / replaced in the same position (to ensure that the oil pump is not operating with excessive side loads).

• Mondeo | Ranger | Transit (2.0 / 2.2 / 2.4 / 3.2 TDCi / TDDi / Di Duratorq)
• OEM Equiv: 303-705 | 303-1093 (PSA 0198H)

This timing tool kit is designed for 2.0L | 2.4L Ford Duratorq engines (including timing pump removal / installation). Suits engines built from 2002 - 2010.

The kit includes a chain tensioner, fuel pump cover removal tool, fuel pump sprocket locking tool, and camshaft / crankshaft sprocket alignment pins.

• Applications: Ford Transit VH VJ VM | Jaguar X-Type X400
• Engine codes: BG | D2FA | FXFA | H9FA | H9FB
• OEM Equiv: 303-249 | 303-675 | 303-679A | 303-682 | 303-698 | 303-1151

A specialised kit for removing the camshaft sprocket from the taper on the camshaft on Pumpe Duse / common rail diesels. Includes a counter hold tool for loosening / tightening the camshaft hub bolt.

• Engines: 1.9L | 2.0L TDI
• OEM Equiv: T10051 | T10052

A comprehensive timing tool kit for belt tensioning a wide range of 1.8L | 2.0L petrol FSi / TFSi engines. The kit includes locking pins, camshaft alignment tool and tensioner wrench.

This kit includes necessary tools for servicing the chain in head and establishing correct valve / camshaft timing.

Applications for Audi A3 | A4 | A6 | S3 | TT

OEM Equivalents & Engine Codes:

• DA0379-23: VAG 3366, VAG T20018, VAG T20044
• ET1020A: BMW 11 2 300, Holden KM 813, Land Rover LRT 12-108
• ET1084-1: VAG T10092
• ET1084-3: VAG T10252
• ET1220B: VAG T10020
• ET2207-3: VAG T10060/A, VAG T40098, VAG T20167, VAG 3204
• TT4001: VAG T40011
• AXW | AXX | BGB | BHZ | BLR | BLX | BLY | BMB | BPJ
• BUL | BVY | BWA | BWE | BYD | BZC | CDLB | CDLC | CDLG

A specialised kit for replacing timing chains on Porsche | VAG petrol engines. This kit suits a wide range of 6 | 8 cylinder engines.

• Applications: VW Bora | Eos | Golf Mk IV | Golf Mk V | Passat | Phaeton | Touareg | Sharan | Transporter T4 | Transporter T5, Audi A3 | A8 | Q7 | S8 | TT, Porsche Cayenne.
• Engines: 2.8L, 3.2L, 3.6L, 4.0L, with 6 & 8 cylinder petrol engines

Adjustable design allows it to work on any sprockets of suitable size. Maximum spoke width - odd numbers 27mm, even numbers 17mm. Forcing screw with 17mm hex head. Body width: 133mm.

• Suits 5 or 6 spoke camshaft pulleys
• OEM Equiv: T40001

Better alignment with 2 ground shoulder screws & facilitates timing adjustment with the vacuum pump & cam cover still in place. The ground screws slide the setting bracket easily into the camshaft slot with the addition of the knob for precise alignment.

• OEM Equiv: 3418 | T10098 | T20038

Setting plate for valve timing on VAG chain drive VR6 engines. Also for FORD Galaxy 2.8L (VR6)

• Size: 175mm wide x 95mm long.

A specialised tool for ensuring the correct alignment of the main seal house crankshaft sensor on 1.4L | 1.6L 16 valve engines fitted to specific VAG vehicles.

• OEM Equiv: T10017

A popular timing tool kit for a wide range of common Audi / Skoda / VW vehicles including many 1.4 | 1.9 | 2.0 TDi PD DOHC engines.

• Includes two versions of the camshaft sprocket locking tool.
• For belt driven diesel engines.

A set ot two cam belt tensioner tools for Volkswagen 4 Cyl TDI PD SOHC diesel engines. Also certain Audi / Skoda applications. These tension tools are designed for Pumpe Duse and Common Rail diesels fitted with larger engine mounting brackets.

• OEM Equiv: T10264 | T10265

Tension lever for Audi / Skoda / VW vehicles. 18mm pin centres / 3mm pins.

• OEM Equiv: T10020

For TDi PD engines fitted with round crankshaft pulleys. For engines fitted with the oval style pulley refer ET2207.

• Applications: Chrysler Sebring, Dodge Avenger | Caliber, Jeep Compass | Patriot
• Engine codes: ECD

An upgraded timing tool kit for VAG 1.2L | 1.4L | 1.6L TFSi / FSi engines.

• Applications: Audi A1, Skoda Fabia | Octavia | Roomster, VW Beetle | Golf | Jetta | Polo | Touran
• A DTI gauge (ET1101) is required, but not included in this kit, as most workshops will already have one.

A specialised kit for engine timing / timing belt replacement on VAG 1.4 - 2.0D Pumpe Duse, and 1.4L | 1.6L | 2.0L CR diesels.

These tools are also suitable for similar engines fitted to Ford | Dodge | Chrysler vehicles.

• Use in conjunction with ET1657.

These two tools are required for setting the camshaft / tensioner on 1.4L | 1.6L petrol engines found in various VAG vehicles from 1999 - 2014.

This kit is suitable for use with replacement cam belt kits: Contitech CT957K1, Gates K025565XS, INA 530 0089 10.

This kit provides the essential camshaft | crankshaft | tensioner tools for working on popular VAG vehicles with 1.4L FSI and 1.6L | 1.9L | 2.0 TDi PD engines fitted to MK5 - MK6 generation vehicles fitted with toothed timing belts.

This kit is suitable for use with cam belt kits including INA 531020110, Contitech CT1028K3, Gates K055569XS.

• OEM Equiv: 310-084 (T10008) | 310-085 (T10050) | T20102 | 310-1054 (T10115) | T10060 | T10100 | T10020 | T10264 | T10265

A comprehensive kit for timing belt replacement on a wide range of VAG petrol / diesel engines. Also for PD diesel engines fitted to Ford Galaxy (99-06). Covers PD engines with both hydraulic and mechanical belt tensioners.

• Includes cambelt tensioner tools and camshaft / injection pump locking tools.

This timing kit has been designed for VAG vehicles with 1.6L | 1.8L turbo chain driven engines from 2003. The kit includes a chain tensioner locking tool, a tensioner locking tool, camshaft alignment tool, and two camshaft / crankshaft pulley holding tools.

• Engine: 1.6L | 1.8L FSI (03-08)