This tool locks the camshaft in position on 1.2L FSi / TFSi petrol engines found across the VAG range from 2009 - 2017.

Do not use this item as a holding tool when loosening / tightening the camshaft sprocket!

• Engine codes: CBZA | CBZB
• OEM Equiv: T10414

Better alignment with 2 ground shoulder screws & facilitates timing adjustment with the vacuum pump & cam cover still in place. The ground screws slide the setting bracket easily into the camshaft slot with the addition of the knob for precise alignment.

• OEM Equiv: 3418 | T10098 | T20038

For fixing camshaft position sensor rotor ring when installing camshaft timing chains. Use in conjunction with ET1470A.

• Applications: Audi AllRoad (C5) | A6 | A8 | Phaeton | S4
• OEM Equiv: T40047
• Engine Codes: BAS | BAT | BBK | BFM | BGH

A specialised cylinder head rebuilt kit designed to allow the camshafts to be correctly fitted into the cylinder head on Porsche / VAG common rail engines.

The set contains a jig, various camshaft support fixtures, gear tooth alignment clamps and locking devices.

• OEM Equiv: T40094 | T40095 | T40096
• Applications: VAG 1.6L | 2.0L | 2.7L | 3.0L | 4.0L | 4.2L diesel CR engines | Porsche 3.0 TDi
• For timing servicing on 2.7L - 4.2L engines, also refer ET1622.

This puller is designed for the removal of balance shafts fitted to 1.8L | 2.0L chain driven 4 cylinder petrol engines.

• M8 x 1.25 internal thread

This kit is designed to lock the camshafts when adjusting timing on Audi A6 (>11) | A8 engines (>10).

• Engine: 4.0L 8 Cyl 4V TFSi
• OEM Equiv: T40264
• Use with T40071 (TT0071) | T40269 (ET0157)

These support guides allow the grill & radiator to be moved away from the engine without needing to disconnect the radiator and air conditioning pipes.

• M8 x 1.25mm (17mm) x 2 guides (OEM Equiv: 3369)
• M8x 1.25mm x 2 guides (OEM Equiv: 3411)
• M10 x 1.5mm x 2 guides

This useful kit is designed for locking the fuel pump into its timed position so that the pump drive belt can be replaced or the pump timing checked.

This kit is designed for 2.7L | 3.0L TDi engines.

• Applications: Audi A4 (07-12), A5 (07-12), A6 (08-11) | Q5 (08-12), Q7 (07-12), VW: Phaeton (07-15), Touareg (07-11) | Porsche: Cayenne (08-16)
• Engine codes: 2.7L CAMA, CGKA, CANA, 3.0L: CCWA, CDYA, CASA, CASD
• OEM Equiv: T40135 | 3242 | T10320 | T40058

Designed for V6 4v common rail diesel, chain driven engines. Used for turning over & positioning the crankshaft during removal & installation of the camshaft timing chain. Also contains crankshaft aligning pins (with flats) & side alignment pins for crankshaft to cylinder head.

• Applications: Audi: A4 | A5 | A6 | A8 | Q7 | Allroad, VW: Phaeton | Touareg, Porsche Cayenne