A special 16 point impact socket for the centring valve of the camshaft timing on BMW & Mini Vanos unit and Ford VCT modules.

• Applications: BMW B38 | B48, Ford 1.0L EcoBoost
• 16 Point impact socket
• 22mm dia
• 1/2" Sq Drv

For 1.0L 3 Cyl EcoBoost GDTi engines.

• OEM Equiv: 303-1602

An essential kit for locking camshafts / crankshafts / timing covers on Ford / Volvo. Plus Mazda crankshaft pulley holder

This kit suits those engines where one camshaft is longer than the other one.

This modest little set is designed for the 2.0L / 2.2L DOHC common rail diesel engines in Ford, Land Rover, Peugeot & Volvo vehicles.

It allows the camshaft pulley to be locked using the timing pin while securing the flywheel / ring gear with the locking pin & plate. The cam belt transmits drive from crankshaft to camshaft then from one camshaft to the other by chain located in the cylinder head.

• OEM Equiv: 303-393 | 303-393-01 | 303-1059 | 303-1277

Essential tools for setting and locking the engine, and for setting the position of the variable cam timing units on Ford 1.0L Ecoboost engines.

• Applications: Ford Fiesta WZ | Focus LZ | EcoSport BK
• OEM Equiv: 303-732 | 303-1064 | 303-1065 | 303-1602 | 303-1604 | 303-1606

Locks camshafts in their timed position, when there is a need to remove the variable valve timing pulleys.

Use with ET0512.

• Applications: Ford Fiesta | Focus, Volvo V40 | S60 | V60
• Engine codes: Ford HXDA | HXJA | JQMA | PNDA | U5JA, Volvo B4164T
• OEM Equiv: 303-1552

A specialised diesel injector puller designed to allow injectors on Ford 2.0L EcoBlue engines to be removed in our piece, so that they can be retrofitted.

• Applications: Ford 2.0L EcoBlue engines
• OEM Equiv: 303-1706

A specialised kit for removing seized injectors from Ford 2.0L EcoBlue engines, from approximately 2016 onwards. Injector removal is necessary for any service tasks that require the removal of the cam cover, cylinder head or cam shafts.

IMPORTANT NOTE: This kit is designed to remove seized injectors only. Using this kit will render any injector inoperable.

• Always ensure that the force screw is properly lubricated.
• OEM Equiv: 303-1690

Comprehensive kit for 2.0L | 2.3L SCTI EcoBoost / Ti-VCT direct injection petrol engines, with variable valve timing.

• Applications: Ford Focus (LW | LZ) | Mondeo (MC) | Mustang 2.3 GTDi (FM / FN)
• Engine codes: MGDA | R9DA | TNBA | YVDB | YVPT

An engine timing kit for the Ford Focus (LZ) with the 1.5L EcoBoost engine.

• Application: Ford Focus (LZ)
• Engine code: M9DD

Essential new tool for removal of BM5G-9F593-BA / CM5G-9F593-BA injector nozzles on Ford EcoBoost GDi engines.

The kit is designed for engines up to 2.0L. The split collet (with its slim design) fits down over the injector. Turn to securely grip the injector, then extract with the slide hammer.

• OEM Equiv: 310-206 (9997410)

A specialised timing kit for late model JLR vehicles fitted with the 2.0L GTDi engine.

• Engine code: 204PT
• Applications: Jaguar e-Pace (17-), XF (12-) | Land Rover Discovery Sport (15-), Freelander 2 (12-15), Range Rover Evoque (11-)
• OEM Equiv: 303-748 | 303-1521 | 303-1594 | 303-1595 | 303-1600

Special 215mm length for easier access. 12 Point w/ rubber insert. 3/8" Sq Drv

• EcoBoost 1.5L DOHC
• Focus LZ | Kuga TF