OE level functionality for Heavy Duty Truck, Agricultural & Industrial applications.

• Heavy, Medium & Light Duty truck coverage for all major Australia / Asian / European / US manufacturers, including Volvo & Iveco
• J1939 / J1708 and OBDII Protocols covered
• Agriculture / Industrial coverage includes Caterpillar, John Deere, Komatsu.
• Full Mercedes Sprinter coverage
• Perform DPF Regeneration; NOX Resets, Injector Programming, Change and Set Parameters, along with SCR/DEF coverage and full bi-directional controls covering over 60 manufacturers.
• Easy updates via WiFi
• IP65 rating | water resistant
• Remote diagnostics via TeamViewer
• Powerful 1.8GHz quadcore processor
• Includes: Multiple connectors, docking station
• Local Australian support
• Global coverage
• Bus, Commercial, Agriculture, Off Highway
• Free initial remote training consultation post purchase
• Australian based technical support only a phone call away
• We regularly test local Australian vehicles for any updates required
• Regular updates & bug fixes (rather than waiting for bi yearly fixes)
• 2 years free updates for all vehicle categories (a $2,800 value)
• No lock out once updates expire
• 4G Sim Card enabled
• Light Commercial now includes: Toyota Hilux / Landcruiser, Ford Ranger, Nissan Navara / Patrol, Isuzu D-Max, Holden Colorado

Coverage

Coming straight out of the U.S is the Fleetcross Service subscription. The ultimate heavy vehicle workshop assistant! Giving you access to 1,000's of repair procedures, wiring diagrams, diagnostic help, TSB's, Service information and so much more at the touch of your fingers.

Don't get caught without it!

Installed onto any CanDo diagnostic tablet, you get 2 years worth of assistance on Japanese, American and European Trucks.

• All information OEM supplied
• Search for repair procedures via the trouble code
• Guided repair procedures from Fault code to predelivery checks
• Service information including lubrication / oil specs and replacement / inspection intervals
• Technical Service Bulletins
• Can be installed on multiple devices (Must be registered on at least 1 CanDo Tablet Scan Tool before being installed on other computers.)
• To arrange a demonstration or if you have any further questions call 1300 137 753

Locks / holds camshaft & crankshaft when servicing the timing chain on 4.0L 12V SOHC engines used in Ford / Land Rover / Mazda vehicles.

• Applications: Ford Courier (05-06), Explorer (96-08) | Mazda B4000 Bravo | Land Rover Discovery 3 (05-09)
• OEM Equiv: OTC 6488 (303-564 | 303-565 | 303-571 | 303-573 | 303-575 | 303-576 | 303-577 | 303-578)

A specialised timing tool kit when replacing the timing belt on Ford Zetec engines. This kit suits a wide range of popular Ford / Mazda vehicles.

• Engine: ZETEC (1998 onwards) | Twin Cam 16V petrol engines
• Applications: Cougar | Escape | Focus | Mondeo
• Timing pin also suits Mazda 121 (1.25L petrol)

This kit suits Ford F150 | Mazda CX-9 vehicles, and is used to hold the camshafts in position when setting the timing. Includes camshaft holding fixtures and chain tensioner hold down tool.

• Applications: Ford F150 | Mazda CX-9
• OEM Equiv: 303-1248 | 303-1530

For new high efficiency 4 cylinder petrol turbocharged engines with variable valve timing fitted to Ford / Volvo vehicles.

Also refer ET5412 camshaft setting bar.

Applications: Ford Fiesta WZ | Focus LW | Kuga TF | B-Max | C-Max, Volvo S60 | V60

OEM Equivalents & Engine Codes:

• TT1054: Ford 303-1054, VAG T10115, VAG T03006
• TT1550: Ford 303-1550, Volvo 999 7431
• TT0748: Audi 303-748, Volvo 999 7406, Mazda 21-259
• TT1097: Ford 303-1097, Volvo 999 7429
• JTJA | JQMA | M8MA | M9MA | JTMA | B4164T | PNDA

For securing the cylinder head, and camshaft / crankshafts during servicing of cylinder head assemblies on 4 | 5 | 6 cylinder engines.

This kit has all the tools required for cam replacements and head rebuilds on Volvo 2.5L petrol engines.

• Engine codes: VOLVO B41XX | B42XX | B52XX | B62XX | B63XX, FORD: B5254T
• Volvo OEM Equiv: 9995451 | 9995454