A specialised master kit of pattern style wheel nut sockets for Audi vehicles. These are commonly used on late model Audi (post 2006) vehicles. Socket sizes are labelled to correspond with OEM sizing.

Do not use with an impact wrench.

• 22 pieces
• OEM equivalent T40073

A specialised bi-hex deep socket that is commonly used on Ford Transit 130 | 150 | 190 vehicles (1993 onwards) and swing arm / axle nuts on Ducati / Augusta motorcycles.

• 56mm dia | 12 Point
• 3/4" Sq Drv

A special 4 pin impact socket for removing the rear hub nut on RWD Ford Transit (>2014). The alignment shaft allows accurate location onto the castellated nut.

• 19mm hex drive
• 6.8mm stud width
• Outer rim: 69.5mm
• OEM Equiv: 205-1007

A specialised 6 point deep impact socket suitable for use on hub nuts on Peugeot vehicles.

• 40mm diameter | 6 Point
• Deep impact socket
• 1/2" Sq Drv

An extra long thin wall socket for deeply recessed hub nuts. Also suitable for adjusting the free play in wheel bearings on Landcruiser / Nissan Patrol.

This socket is turned by inserting a tommy bar or large screwdriver through the cross drilled holes at the opposite end to the hexagonal head.

• 54mm dia | 6 Pt
• 165mm depth | 180mm OL
• Applications: Landcruiser 40/60/70/80/100 Series | Nissan Patrol Y60/GQ/MQ/MK.
• 1/2" Sq Drv

Wheel bearing locknut socket for front wheel adjusting nuts on Landcruiser 40 | 60 | 70 | 80 | 100 Series.

• 55mm | 6 Point hex
• 85mm depth
• Thin wall
• 1/2" Sq Drv

A specialised locknut socket for the removal / installation of wheel bearing lock nuts. Thin wall design / extra deep clearance to suit most applications.

• 2-3/32" | 53mm diameter
• 6 point