The ET2602 is a high-performance digital clamp meter designed for precision electrical measurements in industrial, commercial, and residential environments. Engineered with True RMS technology, it ensures accurate readings even in the presence of distorted waveforms caused by non-linear loads.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• AC / DC Current & Voltage, Resistance, Capacitance, Frequency, Duty Cycle, temperature
• CAT III 600V rating

An incredibly handy set of wheel nut sockets. These sockets are new half size sockets for chrome covered nuts which have become swollen / warped.

Inflated / warped chrome plated caps are a common problem, especially on some Ford vehicles. Standard sized wheel nut sockets will not fit, and a half sized variant is required.

The 19.5mm socket is designed for VW Amarok vehicles.

• Thin wall impact sockets (with protective sleeve)
• 18.5mm | 19.5mm diameter
• 6 point sockets
• 1/2" Sq Drv

A professional tool for removing / installing wheel bearing cups on trucks / trailers / other commercial vehicles with axle capacities from 11 - 50 Ton.

The tool is adjustable to fit most large vehicle applications. Precision engineered jaws grip the diameter of the cup, reducing the risk of damaging the bearing face.

Saves time & energy! One tool covers a broad diameter range - replacing individual bearing plates.

• Extends from 3-5/8" - 6-1/2" (92 - 165mm)
• Applications include: 453-X | BR563 | BR3720 | BR3920 | HM212011

A heavy duty oil filter wrench designed with wide steel band to offer maximum torque, while avoiding crushing filters.

Universal application including agricultural, construction, heavy commercial vehicles etc.

• 96 - 115mm capacity
• Band width: 40mm
• 1/2" Sq Drv

A specialised bi-hex deep socket that is commonly used on Ford Transit 130 | 150 | 190 vehicles (1993 onwards) and swing arm / axle nuts on Ducati / Augusta motorcycles.

• 56mm dia | 12 Point
• 3/4" Sq Drv

A thin wall hub nut socket designed to suit many applications, including 65mm Ford Transit rear hubs (before 1993).

• Size: 65mm (2-9/16") (Outside dia: 84mm)
• 6 point (single hex)
• 3/4" Sq Drv

A specialised 6 point deep impact socket suitable for use on hub nuts on Peugeot vehicles.

• 40mm diameter | 6 Point
• Deep impact socket
• 1/2" Sq Drv

An extra long thin wall socket for deeply recessed hub nuts. Also suitable for adjusting the free play in wheel bearings on Landcruiser / Nissan Patrol.

This socket is turned by inserting a tommy bar or large screwdriver through the cross drilled holes at the opposite end to the hexagonal head.

• 54mm dia | 6 Pt
• 165mm depth | 180mm OL
• Applications: Landcruiser 40/60/70/80/100 Series | Nissan Patrol Y60/GQ/MQ/MK.
• 1/2" Sq Drv

Wheel bearing locknut socket for front wheel adjusting nuts on Landcruiser 40 | 60 | 70 | 80 | 100 Series.

• 55mm | 6 Point hex
• 85mm depth
• Thin wall
• 1/2" Sq Drv

A specialised locknut socket for the removal / installation of wheel bearing lock nuts. Thin wall design / extra deep clearance to suit most applications.

• 2-3/32" | 53mm diameter
• 6 point