Professional quality (ISO 6789), with calibration certificate (±3% accuracy).

• 20-110Nm (15-81 Ft Lbs)

Professional quality (ISO 6789), with calibration certificate (±3% accuracy).

• 70-350Nm (50-250 Ft Lbs)

A set of specialised locking wheel nut sockets for Land Rover vehicles from circa 1998 - 2006). These sockets are essential for removing locking wheel nuts fitted to these vehicles.

Do not use with impact tools.

• Applications: Defender | Discovery | Range Rover (98-06)
• OEM Equiv: STC3420 series (3420A | 3421B | 3422C | 3423D | 3424E | 3425F | 3426G | 3427H | 3428I | 3429J)

Save time, avoid costly component replacement, and restore damaged NOx sensor threads with the Endeavour ET2218 NOx Sensor Tap Set. Designed specifically for servicing NOx sensor ports in modern exhaust after-treatment systems, this specialist kit allows technicians to clean and repair damaged threads, helping ensure correct sensor installation and accurate emissions system operation.

This kit provides the correct taps to restore thread integrity quickly and professionally, reducing downtime and helping avoid expensive repairs.

• Applications include: Ford EcoBlue | Mercedes
• M20 x 1.5 | M22 x 1.5 threads
• 48mm overall length
• Made from Titanium coated Chrome Moly
• Use with axle grease to catch any removed metal in the threads.

A specialised bi-hex deep socket that is commonly used on Ford Transit 130 | 150 | 190 vehicles (1993 onwards) and swing arm / axle nuts on Ducati / Augusta motorcycles.

• 56mm dia | 12 Point
• 3/4" Sq Drv

A thin wall hub nut socket designed to suit many applications, including 65mm Ford Transit rear hubs (before 1993).

• Size: 65mm (2-9/16") (Outside dia: 84mm)
• 6 point (single hex)
• 3/4" Sq Drv

A special 4 pin impact socket for removing the rear hub nut on RWD Ford Transit (>2014). The alignment shaft allows accurate location onto the castellated nut.

• 19mm hex drive
• 6.8mm stud width
• Outer rim: 69.5mm
• OEM Equiv: 205-1007

An extra long thin wall socket for deeply recessed hub nuts. Also suitable for adjusting the free play in wheel bearings on Landcruiser / Nissan Patrol.

This socket is turned by inserting a tommy bar or large screwdriver through the cross drilled holes at the opposite end to the hexagonal head.

• 54mm dia | 6 Pt
• 165mm depth | 180mm OL
• Applications: Landcruiser 40/60/70/80/100 Series | Nissan Patrol Y60/GQ/MQ/MK.
• 1/2" Sq Drv

Wheel bearing locknut socket for front wheel adjusting nuts on Landcruiser 40 | 60 | 70 | 80 | 100 Series.

• 55mm | 6 Point hex
• 85mm depth
• Thin wall
• 1/2" Sq Drv

A specialised locknut socket for the removal / installation of wheel bearing lock nuts. Thin wall design / extra deep clearance to suit most applications.

• 2-3/32" | 53mm diameter
• 6 point