Essential new tool for removal of BM5G-9F593-BA / CM5G-9F593-BA injector nozzles on Ford EcoBoost GDi engines.
The kit is designed for engines up to 2.0L. The split collet (with its slim design) fits down over the injector. Turn to securely grip the injector, then extract with the slide hammer.
- OEM Equiv: 310-206 (9997410)
Engine Code(s)
B4164T, MGDA, TNBA, R9CF, HXDA, PNDA, HXJA, HXJB, U5JA, JQMA, JTMA, M8MA, M9MA, M1JE, M1DA
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Volvo | S60 | B4164T | 1.6L | 2011 | 2015 | |
| Volvo | V60 | B4164T | 1.6L | 2011 | 2015 | |
| Volvo | V40 | B4164T | 1.6L | 2013 | 2015 | |
| Volvo | S60 | B4164T2 | 1.6L | 2011 | 2011 | |
| Volvo | S80 | B4164T2 | 1.6L | 2011 | 2011 | |
| Volvo | V60 | B4164T2 | 1.6L | 2011 | 2011 | |
| Volvo | V70 | B4164T2 | 1.6L | 2011 | 2011 | |
| Volvo | S60 | B4164T3 | 1.6L | 2011 | 2011 | |
| Volvo | V60 | B4164T3 | 1.6L | 2011 | 2011 | |
| Volvo | S60 | T4 | B4164T4 | 1.6L | 2011 | 2015 |
| Volvo | V60 | T4 | B4164T4 | 1.6L | 2011 | 2013 |
| Ford | Focus | LV | HXDA | 1.6L | 2008 | 2011 |
| Ford | Fiesta | WS | HXJA | 1.6L | 2009 | 2010 |
| Ford | Fiesta | WT | HXJB | 1.6L | 2010 | 2013 |
| Ford | Kuga | TF | JQMA | 1.6L | 2012 | 2015 |
| Ford | Kuga | TF | JTMA | 1.6L | 2013 | 2015 |
| Ford | Focus | LZ | M1DA | 1.0L | 2016 | 2019 |
| Ford | Fiesta | WZ | M1JE | 1.0L | 2013 | |
| Ford | Kuga | TF | M8MA | 1.5L | 2015 | 2016 |
| Ford | Escape | ZG | M8MA | 1.5L | 2016 | |
| Ford | Kuga | TF | M9MA | 1.5L | 2015 | 2016 |
| Ford | Escape | ZG | M9MA | 1.5L | 2016 | |
| Ford | Focus | LW | MGDA | 2.0L | 2011 | 2015 |
| Ford | Focus | LW | PNDA | 1.6L | 2011 | 2015 |
| Ford | Mondeo | MD | R9CF | 2.0L | 2017 | |
| Ford | Mondeo | MC | TNBA | 2.0L | 2011 | 2015 |
| Ford | Fiesta | WT | U5JA | 1.6L | 2012 | 2013 |
310-206
9997410
| SKU | ET0011F |
| Barcode # | 9321280386464 |
| Brand | Automotive |
| Product weight | 2.1530kg |
| Shipping weight | 2.153000kg |
| Vehicle Make | Ford |
| Vehicle Make | Volvo |
12 Months
Others also bought
Holden Fuel Injection O-Ring Seal Install Kit
A specialised kit for replacing the teflon O-ring seals on Holden engines, and some Subaru engines.
The Hitachi SIDI system has 2 seals on the injector tip which must be installed into the grooves before the injectors are installed into their bores in the cylinder head. Newer injectors (2013>) from Bosch / Continental / Delphi have slightly larger injector tips.
This kit also includes a seal installer to drive the seal over the pilot and into the groove. And a sizer to compress each seal into its groove.
- Holden 2.0L | 3.6L engines (10-17) with Hitachi injectors.
- Holden 2.0L | 2.5L | 5.3L | 6.2L engines (12-17) with Bosch, Continental, Delphi injectors.
- Holden Colorado 7 (2016)
- Subaru 2.0L | 2.4L turbo engines (14-19).
More from this category
BMW Fuel Injector Removal Kit
This master kit is designed for removal and installation of both petrol | diesel injectors in various BMW engines.
This kit is particularly suitable for petrol engines. If working on the N47 / N57 you may find the ET1905 to be more suitable.
- Application: N20 | N47 | N54 | N57 | N63 (not suitable for S63 injectors)
- OEM Equiv: 130180 | 130270 | 130320 | 2249115
BMW Fuel Injector Removal Tool
A specialised injector removal tool for N20 | N55 petrol engines which have injectors with the hold down on top.
- Engines: N20 | N55
- OEM Equiv: 130 320
BMW Fuel Injector Removal Tool
A specialised injector removal tool for modern BMW petrol engines, with N55 engine code (up to engine number 14407684).
- Engine code: N55 3.0L (08-16)
- OEM Equiv: 13 0 270 (130270)
BMW Fuel Injector Remover
A specialised fuel injector removal / installation tool for BMW N63 engines (after September 2012).
For earlier engines refer ET1656A.
- OEM Equiv: 2249115
BMW Fuel Injector Seal Installation Tool
This kit comprises fitting aids to correctly fit the Teflon seal onto a BMW fuel injector prior to refitting the fuel injector into the cylinder head.
The Teflon seal material is designed to expand once installed into the injector bore to enable an effective seal. There are two methods of shrinking the Teflon sea, depending up the engine code / type of injector fitted.
- Applications: N13 | N14 | N18 | N20 | N43 | N55 | N63 | N74 | S55 | S63 | B38 | B48
- OEM Equiv: 130190 | 130280
BMW Injector Remover
A specialised fuel injector removal / installation tool for BMW B38 | B48 engines.
- B38 / B48
- OEM Equiv: 83 30 2 385 417