Combination Budd wheel nut socket with dual hex / square sizing. Extra deep design for removal of nut / stud. Impact grade for use with impact wrenches.

• Budd wheel nut socket
• 17mm square (4Pt) x 35mm hex
• Impact grade (Chrome Moly)
• 3/4" Sq Drv

Combination Budd wheel nut socket. Extra deep design for removal of nut / stud. Impact grade for use with impact wrenches.

Primary applications include front / rear axles on Japanese trucks - Isuzu NPR (front & rear) | Mitsubishi Fuso | Hino | Toyota Dyna/ Dynaps (rear) & Dyna/ Rino (front).

• Budd wheel nut socket
• 21mm square (4 Pt) x 41mm hex
• Impact grade (Chrome Moly)
• 3/4" Sq Drv

Make Hino Euro 6 oil filter servicing faster, easier, and damage-free with the Endeavour ET2018A-54 Oil Filter wrench. Specifically engineered for Hino Euro 6 11-tonne diesel engines, this specialist 113mm filter wrench provides a precise fit for safe and efficient removal and installation of the oil filter housing.

• Application: Hino Euro 6
• 113mm diameter

Built for durability and accuracy, this wrench ensures safe and efficient removal and installation of PVC and fuel filters without damaging the filter housing. Part of the Endeavour range of specialty oil filter wrenches.

• 82mm diameter | 8 Point
• Suits OEM filters: Hino (A04 | A09) S1222-EVO11 | Isuzu (4HK1 | 6HK1) 8-97606310-0 | Mitsubishi (6M60) ME302763 | Ryco R2774P

This master kit is designed for removal and installation of both petrol | diesel injectors in various BMW engines.

This kit is particularly suitable for petrol engines. If working on the N47 / N57 you may find the ET1905 to be more suitable.

• Application: N20 | N47 | N54 | N57 | N63 (not suitable for S63 injectors)
• OEM Equiv: 130180 | 130270 | 130320 | 2249115

This kit comprises fitting aids to correctly fit the Teflon seal onto a BMW fuel injector prior to refitting the fuel injector into the cylinder head.

The Teflon seal material is designed to expand once installed into the injector bore to enable an effective seal. There are two methods of shrinking the Teflon sea, depending up the engine code / type of injector fitted.

• Applications: N13 | N14 | N18 | N20 | N43 | N55 | N63 | N74 | S55 | S63 | B38 | B48
• OEM Equiv: 130190 | 130280

This BMW Fuel Injector Tool (OEM 2358417) is an essential solution for safely extracting and reinstalling fuel injectors on modern BMW petrol engines. Always use with a torque wrench, and follow manufacturer instructions.

For injector seal replacement refer ET1735B.

• Applications: - BMW 1 Series, 3 Series, 5 Series, X1, X3 | MINI Cooper, Clubman, Countryman from 2014 onward
• Engine codes: B38 | B48 | B58
• OEM Equiv: 83302385417 (2358417)

A specialised injector removal tool for N20 | N55 petrol engines which have injectors with the hold down on top. For late model N55 engines, please refer to ET1526B.

• Engines: N20 | N55 (pre 2013)
• OEM equiv: 130320 (13 0 320)

The ET1656A is an injector removal tool kit designed specifically for BMW engines, including N63, S63, and N43 series. This tool is essential for safely and efficiently extracting stuck or seized fuel injectors, a common issue in high-performance and turbocharged BMW engines.

• Applications: 5 Series | 6 Series | 7 Series | X5 and X6 vehicles
• Engine codes: N43 | N63 (08-12) / S63
• OEM Equiv: 130300 (130 300)

A specialised fuel injector removal / installation tool for BMW N63 engines (after September 2012).

For earlier engines refer ET1656A.

• OEM Equiv: 2249 115 (2249115)