A timing tool kit for the 4.2L V8 R-CAT engine used in Audi vehicles. The kit is designed to lock the timing of camshafts and cam sensors.

• Applications: Audi Allroad | A6 Quattro | S4
• Engine Codes: BAS | BAT | BBK
• OEM Equiv: T10068A | T40046 | T40047

Adjustable design allows it to work on any sprockets of suitable size. Maximum spoke width - odd numbers 27mm, even numbers 17mm. Forcing screw with 17mm hex head. Body width: 133mm.

• Suits 5 or 6 spoke camshaft pulleys
• OEM Equiv: T40001

For changing V ribbed belts. Use with 1/2" sq drv ratchet or breaker bar.

• Engine codes: ABA | AHL | AHU
• Applications: VW Golf | Passat | Polo (93-99)
• 15mm wide slot.

Used for the removal / installation of the 4 / 3 way central valve for camshaft adjustment. Applicable to many TFSI direct injection engines (Gen III).

• Engine codes: CCZA | CCZB | CCZC | CDAA
• OEM Equiv: T10352

Locking tensioning pin for ribbed V belts.

• Engine codes: AAH | AFC | AAN | APB | AHA | ATQ | AVK | ART | AWN | BBD | BWA
• OEM Equiv: T10060/A

For servicing the camshaft adjuster securing bolt on 2.0L TFSi engines. M10 Polydrive (short version) - longer version T10070.

Do NOT use a standard Torx socket when removing the bolt on the camshaft sprocket.

• M10 Polydrive (6 splines)
• 54mm length
• OEM Equiv: T40080
• 1/2" Sq Drv

A set of three assembly camshaft tools for removing camshaft control valves before chain removal, on 4 Cyl chain drive petrol engines.

• Application: 1.8L | 2.0L 4 Cyl chain drive petrol engines
• OEM Equiv: T10352 | T10352/1 | T10352/2
• 3/8" Sq Drv

This locking strap suits VAG 2.4L | 2.8L | 2.7L Turbo 4 Cam 30V engines (99 - 05). Size: 685mm O/A x 6mm & 8mm pins each side x 54mm distance x 40mm hole dia. USE with ET1105-4, ET1657, ET1205B & ET1297.

• Engine codes: ACK | AGA | APR | BBG
• OEM Equiv: 3391

This kit is designed to lock the camshafts when adjusting timing on Audi A6 (>11) | A8 engines (>10).

• Engine: 4.0L 8 Cyl 4V TFSi
• OEM Equiv: T40264
• Use with T40071 (TT0071) | T40269 (ET0157)

For locking camshafts when checking timing on A4 | A6 with 8 cylinder engines.

• OEM Equiv: T40046

This tool locks the camshaft in position on 1.2L FSi / TFSi petrol engines found across the VAG range from 2009 - 2017.

Do not use this item as a holding tool when loosening / tightening the camshaft sprocket!

• Engine codes: CBZA | CBZB
• OEM Equiv: T10414

A specialised kit for removing / installing the camshafts on VAG petrol engines. Please refer to ET0900 for the relevant timing tool kit.

• Engines: 1.8L | 2.0L TFSI Turbocharged 4V
• OEM Equiv: T40191 | T40196

Rotate and hold the camshaft on 1.8L | 2.0L TFSI Gen III petrol engines. Use with ET0281 timing kit, and ET9716 crankshaft pulley holding tool.

• Engine: 4 Cyl 1.8L | 2.0L 4V TFSI (Gen III)
• 3/8" Sq Drv
• OEM Equiv: T40266

A specialised wrench to hold the pulley while loosening / tightening the pulley fixing bolt. This tool is recommended by the manufacturer to set the No. 1 cylinder at TDC. Covers engines from 2006 onwards.

• Applications: 1.8L | 2.0L TFSi / TSi petrol engines
• OEM Equiv: T10355

For locking crankshaft at TDC position during timing belt / flywheel / drive plate replacement or removal of the crankshaft bolt.

• Size: M12 x 1.5mm
• OEM Equiv: T40026
• Engine code: ASN | BBJ

An essential tool for installing the rear mail oil seal with the integrated sender wheel.

This tool suits VAG vehicles with the 1.6L | 1.9L | 2.0L TDI engines, as well as some EA111 | EA211 petrol engines.

• OEM Equiv: T10134 (for OE seal # 03L 103 171A)

A specialised socket for turning the crankshaft to set TDC position on 2.5L 4V Turbo VAG petrol engines.

• Engine codes: CEPA | CEPB | CTSA | CZGA | CZGB
• OEM Equiv: T03003A

This useful kit is designed for locking the fuel pump into its timed position so that the pump drive belt can be replaced or the pump timing checked.

This kit is designed for 2.7L | 3.0L TDi engines.

• Applications: Audi A4 (07-12), A5 (07-12), A6 (08-11) | Q5 (08-12), Q7 (07-12), VW: Phaeton (07-15), Touareg (07-11) | Porsche: Cayenne (08-16)
• Engine codes: 2.7L CAMA, CGKA, CANA, 3.0L: CCWA, CDYA, CASA, CASD
• OEM Equiv: T40135 | 3242 | T10320 | T40058

A specialised puller for removing the toothed belt pulley from the high pressure pump, in order to enable the removal of the pump. This tool is essential for removing the injection pump.

• Engine: 1.6L | 2.0L TDI
• Application: VW Touareg V6
• OEM Equiv: T40064

A specialised tool to remove the toothed belt drive sprocket on high pressure fuel pumps fitted to VAG 3.0L 6 Cyl 4V diesel engines.

• Applications: Audi A5 | A6 | A8 | Q7, VW Phaeton | Touareg
• OEM Equiv: T10320

Designed for V6 4v common rail diesel, chain driven engines. Used for turning over & positioning the crankshaft during removal & installation of the camshaft timing chain. Also contains crankshaft aligning pins (with flats) & side alignment pins for crankshaft to cylinder head.

• Applications: Audi: A4 | A5 | A6 | A8 | Q7 | Allroad, VW: Phaeton | Touareg, Porsche Cayenne

These specialised tools are designed to quickly / safely release the intake manifold pipe connections on a range of Audi / VW direct injection turbo charged petrol engines.

This set includes two different sized release tools.

• Engines: 1.0L | 1.2L | 1.4L FSI / TFSI
• Applications: Audi A1 | A3 | Q2, VW Beetle | Golf (13-) | Jetta | Polo | Up!
• OEM Equiv: T10527

This ball end spline bit socket is commonly used for servicing the intake manifold fixings on 2.0L 4 Cyl TDI engines used on Audi A3 and VW Golf models (from 2013). The ball end design allows for better access in tight areas.

• M10 Spline | ball end
• 140mm OL
• 1/2" Sq Drv
• OEM Equiv: T10501

For mounting and aligning the oil pump gear on Audi 2.5L including 5 cylinder turbo engines with 20 valve (4 valves / cylinder) cylinder heads.

• Application: Audi TT (07-) 2.5 ltr. 4-valve turbo TTRS
• OEM Equiv: T03005A

A specialised wrench for counter holding the crankshaft pulley when loosening / tightening the centre bolt on selected VAG engines. This wrench has an angled shaft to assist access on transverse mounted engines.

• Engines: 1.0L | 1.2L | 1.4L 4V injection, toothed belt drive
• 750mm long fixed handle
• OEM Equiv: T10475

A very handy kit, with a wide range of interchangeable pins, for holding the camshaft gear when loosening / tightening the centre bolt.

The adjustable jaw opening / interchangeable pin sets allows this tool to be used almost universally, although with the addition of the T10554 counterhold tool, this kit is specifically designed for VAG vehicles.

• Adaptor sizes: ¯4.8mm, ¯6mm, square 15mm x 6mm, square 15mm x 12mm, cup 13mm x 17mm, cup 16mm x 20mm, Spline M10, M12
• OEM Equiv: T10172 | T10554

Drive gear wheel adjustment tool for engines with a mechanical vacuum pump. Holds the high pressure vacuum pump drive chain sprocket when adjusting cam / crank timing.

• Engine code: AXZ | BHK | BWS
• OEM Equiv: T10363

A popular timing tool kit for a wide range of common Audi / Skoda / VW vehicles including many 1.4 | 1.9 | 2.0 TDi PD DOHC engines.

• Includes two versions of the camshaft sprocket locking tool.
• For belt driven diesel engines.

A set ot two cam belt tensioner tools for Volkswagen 4 Cyl TDI PD SOHC diesel engines. Also certain Audi / Skoda applications. These tension tools are designed for Pumpe Duse and Common Rail diesels fitted with larger engine mounting brackets.

• OEM Equiv: T10264 | T10265

Tension lever for Audi / Skoda / VW vehicles. 18mm pin centres / 3mm pins.

• OEM Equiv: T10020

For TDi PD engines fitted with round crankshaft pulleys. For engines fitted with the oval style pulley refer ET2207.

• Applications: Chrysler Sebring, Dodge Avenger | Caliber, Jeep Compass | Patriot
• Engine codes: ECD

An upgraded timing tool kit for VAG 1.2L | 1.4L | 1.6L TFSi / FSi engines.

• Applications: Audi A1, Skoda Fabia | Octavia | Roomster, VW Beetle | Golf | Jetta | Polo | Touran
• A DTI gauge (ET1101) is required, but not included in this kit, as most workshops will already have one.

A specialised kit for engine timing / timing belt replacement on VAG 1.4 - 2.0D Pumpe Duse, and 1.4L | 1.6L | 2.0L CR diesels.

These tools are also suitable for similar engines fitted to Ford | Dodge | Chrysler vehicles.

• Use in conjunction with ET1657.

This kit provides the essential camshaft | crankshaft tools for working on popular VAG vehicles with 1.4L FSI and 1.6L | 1.9L | 2.0 TDi PD engines fitted to MK5 - MK6 generation vehicles fitted with toothed timing belts.

This kit is suitable for use with cam belt kits including INA 531020110, Contitech CT1028K3, Gates K055569XS.

• OEM Equiv: 310-084 (T10008) | 310-085 (T10050) | T20102 | 310-1054 (T10115) | T10060 | T10100 | T10264 | T10265

This timing kit is designed for Audi 2.5L chain driven petrol engines. These tools lock the engine into its timed position for replacing the timing chain, or checking cam timing.

• Applications: Audi RS3 | RS Q3 | TT
• Engine codes: CZGA | CZGB | CEPA | CEPB | CTSA
• OEM Equiv: T03003 | T03006 | T40069 | T40070 | T40079

A specialised kit for Audi 3.0L petrol engines (from 2001 - 2010), when adjusting left & right camshafts (Quad cam configuration drives all four camshafts from the crankshafts). Use with ET1567.

• Engine codes: ASN | BBJ
• Applications: Audi A4 | A6