This kit is designed to lock the camshafts when adjusting timing on Audi A6 (>11) | A8 engines (>10).
- Engine: 4.0L 8 Cyl 4V TFSi
- OEM Equiv: T40264
- Use with T40071 (TT0071) | T40269 (ET0157)
Engine Code(s)
CRDB, CWUB, CWUC, CEUC, CGTA, CTFA, CTGE
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Audi | S6 | C7 | CEUC | 4.0L | 2012 | 2015 |
| Audi | S7 | C7 | CEUC | 4.0L | 2012 | 2015 |
| Audi | S8 | D4 | CGTA | 4.0L | 2012 | |
| Audi | RS6 | 4G | CRDB | 4.0L | 2013 | 2015 |
| Audi | RS7 | 4G | CRDB | 4.0L | 2014 | 2015 |
| Audi | S8 | D4 | CTFA | 4.0L | 2014 | |
| Audi | S6 | C7 | CTGE | 4.0L | 2015 | |
| Audi | S7 | C7 | CTGE | 4.0L | 2015 | |
| Audi | RS6 | 4G | CWUB | 4.0L | 2015 | 2018 |
| Audi | RS7 | 4G | CWUB | 4.0L | 2015 | |
| Audi | RS6 | 4G | CWUC | 4.0L | 2015 | 2018 |
| Audi | RS7 | 4G | CWUC | 4.0L | 2015 |
T40264
T40264
| SKU | ET0041A |
| Barcode # | 9321280386471 |
| Brand | Automotive |
| Product weight | 1.5700kg |
| Shipping weight | 1.570000kg |
12 Months
Calculate Shipping
Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
You may also like
VAG Camshaft Turning Socket
This 3 notch camshaft adjuster tuning socket is designed to turn the camshaft when timing FSi engines.
- Applications: 2.5L 5 cyl, 3.2L V6, 4.2L V8 (BNS, BVJ & BAR) and 3.0L V6 S/C engines, 5.2L V10
- OEM Equiv: T40269
More from this category
Camshaft / Head Rebuild Kit
A specialised cylinder head rebuilt kit designed to allow the camshafts to be correctly fitted into the cylinder head on Porsche / VAG common rail engines.
The set contains a jig, various camshaft support fixtures, gear tooth alignment clamps and locking devices.
- OEM Equiv: T40094 | T40095 | T40096
- Applications: VAG 1.6L | 2.0L | 2.7L | 3.0L | 4.0L | 4.2L diesel CR engines | Porsche 3.0 TDi
- For timing servicing on 2.7L - 4.2L engines, also refer ET1622.
VAG Balance Shaft Puller
This puller is designed for the removal of balance shafts fitted to 1.8L | 2.0L chain driven 4 cylinder petrol engines.
- M8 x 1.25 internal thread
VAG Camshaft Setting Plate
Setting plate for valve timing on VAG chain drive VR6 engines. Also for FORD Galaxy 2.8L (VR6)
- Size: 175mm wide x 95mm long.
VAG Front End Support Guide Set
These support guides allow the grill & radiator to be moved away from the engine without needing to disconnect the radiator and air conditioning pipes.
- M8 x 1.25mm (17mm) x 2 guides (OEM Equiv: 3369)
- M8x 1.25mm x 2 guides (OEM Equiv: 3411)
- M10 x 1.5mm x 2 guides (OEM Equiv:T10093)
VAG Fuel Pump Drive Kit
This useful kit is designed for locking the fuel pump into its timed position so that the pump drive belt can be replaced or the pump timing checked.
This kit is designed for 2.7L | 3.0L TDi engines.
- Applications: Audi A4 (07-12), A5 (07-12), A6 (08-11) | Q5 (08-12), Q7 (07-12), VW: Phaeton (07-15), Touareg (07-11) | Porsche: Cayenne (08-16)
- Engine codes: 2.7L CAMA, CGKA, CANA, 3.0L: CCWA, CDYA, CASA, CASD
- OEM Equiv: T40135 | 3242 | T10320 | T40058
VAG Injection Pump / Timing Kit
Designed for V6 4v common rail diesel, chain driven engines. Used for turning over & positioning the crankshaft during removal & installation of the camshaft timing chain. Also contains crankshaft aligning pins (with flats) & side alignment pins for crankshaft to cylinder head.
- Applications: Audi: A4 | A5 | A6 | A8 | Q7 | Allroad, VW: Phaeton | Touareg, Porsche Cayenne