Required tools when replacing the crank seal / removing front engine cover to replace the chain. For use on 2.0L | 2.2L | 2.4L | 3.2L TDCi / TDDi Duratorq engines fitted to Ford Transit | Ford Ranger plus Jaguar X Type X400 and Land Rover Defender.
- First component removes diesel pump sprocket cover, and also allows oil seal to be removed / replaced.
- Second component aligns / centralises the front camshaft chain cover before fitting the new oil seal.
Engine Code(s)
P5AT, P4AT
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Ford | Ranger | PX | P4AT | 2.2L | 2011 | 2015 |
| Mazda | BT-50 | UR | P4AT | 2.2L | 2011 | |
| Ford | Everest | UA | P5AT | 3.2L | 2015 | |
| Ford | Ranger | PX | P5AT | 3.2L | 2011 | |
| Mazda | BT50 | UR | P5AT | 3.2L | 2015 | 2016 |
| Mazda | BT50 | UP | P5AT | 3.2L | 2011 | 2015 |
303-679A
303-682
Ford Fuel Pump Cover Removal Tool
For Duratorq (Puma) engines. Removes diesel pump sprocket cover, and allows the front crankshaft oil seal to be wound out.
Ford Engine Front Cover Alignment Tool
For front covers that are a pressed tin component not fitted with dowel pins to position it. This tool aligns the front camshaft chain cover before fitting a new front oil seal. Use on crankshaft end to position to the cover and hold in position while cover fixings are tightened. Part of ET9161 kit for replacing front crankshaft oil seals. Applications: Mondeo, Ranger Transit w/ Puma engines.
303-679A
303-682
Ford Fuel Pump Cover Removal Tool
For Duratorq (Puma) engines. Removes diesel pump sprocket cover, and allows the front crankshaft oil seal to be wound out.
Ford Engine Front Cover Alignment Tool
For front covers that are a pressed tin component not fitted with dowel pins to position it. This tool aligns the front camshaft chain cover before fitting a new front oil seal. Use on crankshaft end to position to the cover and hold in position while cover fixings are tightened. Part of ET9161 kit for replacing front crankshaft oil seals. Applications: Mondeo, Ranger Transit w/ Puma engines.
| SKU | ET9161 |
| Barcode # | 9321280369436 |
| Brand | Automotive |
| Product weight | 1.6000kg |
| Shipping weight | 1.600000kg |
| Vehicle Make | Ford |
12 Months
Calculate Shipping
Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
Others also bought
ET7191-38 Promo
Diesel Engine Compression Test Kit
Comprehensive kit suits a wide range of small passenger vehicles through light trucks.
- Includes gauge assembly, glow plug test adaptors and universal "clamp on" adaptors injector pullers.
Digital Insulation Tester / Multimeter
A professional quality insulation tester with inbuilt true RMS multimeter. This tool is ideal for testing the insulation of the high voltage wires used on hybrid vehicles.
This tester conforms to EN61010 CAT III (1000V) and CAT IV (600V).
- IP67 waterproof rating
- Use as a standalone device, or link wirelessly to a computer to save / print results
- Supplied with high voltage probes, thermocouple and wireless USB cable.
More from this category
Bosch Injection Pump Sockets
Specialised sockets for disassembling Bosch fuel pumps. This kit contains five tamperproof sockets for bolts commonly found on these fuel pumps.
- 7mm: EDC pump cover socket (96-03) OEM 0986612605
- 12.4mm: VP37 pump
- 12.6mm: VE Diesel Pump Socket OEM 098661750
- 14.4mm: Cover screw 28.1mm: Dial gauge cover
Diesel Injection Priming Tool
An essential tool for priming fuel systems after any service work that disturbs the fuel system to enable the engine to restart.
Ford Fuel Injection Pump Sprocket Locking Tool
Specialised locking tool for Ford Transit (2.2L) and Ford Ranger (3.2L) Puma engines. Allows for the removal of the chain driven high pressure diesel fuel pump while maintaining engine timing / timing chain position.
Use with ET1311 and ET9161.
- OEM Equiv: 303-1317
Ford High Pressure Pump Tools
Essential tools for allowing the removal of the chain driven high pressure diesel fuel pump, while maintaining the engine timing and chain position.
Designed to be used with the ET9161 to remove the sprocket cover.
- Kit comprises ET1311 / ET1512
Ford Temperature Sensor Socket
A specialised socket for removing the cylinder head temperature sensor on certain Ford engines without damaging the sensor wire. The socket has a cut out that fits in the sensor.
- 15mm dia | 12 Point
- 1/2" Sq Drv
- Impact grade, Chrome Moly construction
- Applications: 1.8L | 2.0L | 2.4L | 3.2L Lynx / Puma Duratorq diesel engines
Injector Line Wrench | 14mm
Specialised flare nut wrench with multiple angles / offset design allowing easy access to remove fuel injection lines on PSA group HDi engines.
- 14mm | 12 Point
- 200mm long
- Made from CrV