Crankshaft Front Oil Seal Tool | Ford Ranger
SKU: ET9161
Automotive
Automotive
Required tools when replacing the crank seal / removing front engine cover to replace the chain. For use on 2.0L | 2.2L | 2.4L | 3.2L TDCi / TDDi Duratorq engines fitted to Ford Transit | Ford Ranger plus Jaguar X Type X400 and Land Rover Defender.
- First component removes diesel pump sprocket cover, and also allows oil seal to be removed / replaced.
- Second component aligns / centralises the front camshaft chain cover before fitting the new oil seal.
Engine Code(s)
P5AT, P4AT
Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
Ford | Ranger | PX | P4AT | 2.2L | 2011 | 2015 |
Mazda | BT-50 | UR | P4AT | 2.2L | 2011 | |
Ford | Everest | UA | P5AT | 3.2L | 2015 | |
Ford | Ranger | PX | P5AT | 3.2L | 2011 | |
Mazda | BT50 | UR | P5AT | 3.2L | 2015 | 2016 |
Mazda | BT50 | UP | P5AT | 3.2L | 2011 | 2015 |
303-679A
303-682

Ford Fuel Pump Cover Removal Tool
For Duratorq (Puma) engines. Removes diesel pump sprocket cover, and allows the front crankshaft oil seal to be wound out.

Ford Engine Front Cover Alignment Tool
For front covers that are a pressed tin component not fitted with dowel pins to position it. This tool aligns the front camshaft chain cover before fitting a new front oil seal. Use on crankshaft end to position to the cover and hold in position while cover fixings are tightened. Part of ET9161 kit for replacing front crankshaft oil seals. Applications: Mondeo, Ranger Transit w/ Puma engines.
303-679A
303-682

Ford Fuel Pump Cover Removal Tool
For Duratorq (Puma) engines. Removes diesel pump sprocket cover, and allows the front crankshaft oil seal to be wound out.

Ford Engine Front Cover Alignment Tool
For front covers that are a pressed tin component not fitted with dowel pins to position it. This tool aligns the front camshaft chain cover before fitting a new front oil seal. Use on crankshaft end to position to the cover and hold in position while cover fixings are tightened. Part of ET9161 kit for replacing front crankshaft oil seals. Applications: Mondeo, Ranger Transit w/ Puma engines.
SKU | ET9161 |
Barcode # | 9321280369436 |
Brand | Automotive |
Product weight | 1.6000kg |
Shipping weight | 1.600000kg |
Vehicle Make | Ford |
12 Months
Calculate Shipping
Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
Others also bought


VAG Crankshaft Oil Seal Tool
An essential tool for installing the rear main oil seal with the integrated sender wheel on VW Crafter (06>) with 2.5L TDI engines & Audi 2.0L diesel.
- Application: VW Crafter 2.5L Tdi / Blue Tdi>
- Engine code: BJJ | BJK | BJL | BJM | CECA | DTNA | DTPA
- Suits VW OE seals: 076 103 171 | 05L 103 171
- OEM Equiv: T50010

Torx Plus (EPL) Female Socket Set | 15 pce
A master kit of female Torx Plus (EPL) sockets. Torx Plus bolts are increasingly being used in many automotive applications. These are a six (6) sided profile, but different to eTorx.
Part of the Endeavour Tools range of specialty sockets.
- Application examples: motor mount bolts - BMW / MINI (EP10 / EP12) | Honda / Accura (EP22 / EP24)
- Sizes: 1/4" Sq drv - 6, 7, 8, 10, 12 | 3/8" Sq drv - 14, 16, 18, 20 | 1/2" Sq drv - 22, 24, 26, 28, 30, 32


Automotive Multimeter / Oscilloscope (2 Channel)
Designed for the automotive professional. Diagnose bus & sensor issues. Six built in categories of automotive waveform libraries, and custom waveforms (capture known good). True RMS multimeter / Rechargeable / Accessories included.
- Engine testing
- Ignition testing
- Sensor testing
- Starting & charging testing
- BUS diagnostics
- 2 Channel
- 100MHz Bandwidth
- 500MSa/s Sampling Rate
More from this category

Bosch VE Injection Pump Sockets (5 Pce)
Specialised sockets for disassembling Bosch fuel pumps. This kit contains five tamperproof sockets for bolts commonly found on these fuel pumps.
- 7mm: EDC pump cover socket (96-03) OEM 0986612605
- 12.4mm: VP37 pump
- 12.6mm: VE Diesel Pump Socket OEM 098661750
- 14.4mm: Cover screw 28.1mm: Dial gauge cover

Diesel Injection Priming Tool
An essential tool for priming fuel systems after any service work that disturbs the fuel system to enable the engine to restart.

Ford 15mm Temperature Sensor Socket
A specialised socket for removing the cylinder head temperature sensor on certain Ford engines without damaging the sensor wire. The socket has a cut out that fits in the sensor.
- 15mm dia | 12 Point
- 1/2" Sq Drv
- Impact grade, Chrome Moly construction
- Applications: 1.8L | 2.0L | 2.4L | 3.2L Lynx / Puma Duratorq diesel engines


Ford Fuel Injection Pump Sprocket Locking Tool
Specialised locking tool for Ford Transit (2.2L) and Ford Ranger (3.2L) Puma engines. Allows for the removal of the chain driven high pressure diesel fuel pump while maintaining engine timing / timing chain position.
Use with ET1311 and ET9161.
- OEM Equiv: 303-1317


Ford Ranger High Pressure Pump Tools
Essential tools for allowing the removal of the chain driven high pressure diesel fuel pump, while maintaining the engine timing and chain position.
Designed to be used with the ET9161 to remove the sprocket cover.
- Kit comprises ET1311 / ET1512

Injector Line Wrench | 14mm
Specialised flare nut wrench with multiple angles / offset design allowing easy access to remove fuel injection lines on PSA group HDi engines.
- 14mm | 12 Point
- 200mm long
- Made from CrV