Required tools when replacing the crank seal / removing front engine cover to replace the chain. For use on 2.0L | 2.2L | 2.4L | 3.2L TDCi / TDDi Duratorq engines fitted to Ford Transit | Ford Ranger plus Jaguar X Type X400 and Land Rover Defender.

• First component removes diesel pump sprocket cover, and also allows oil seal to be removed / replaced.
• Second component aligns / centralises the front camshaft chain cover before fitting the new oil seal.

A specialised kit for removing seized injectors from Ford 2.0L EcoBlue engines, from approximately 2016 onwards. Injector removal is necessary for any service tasks that require the removal of the cam cover, cylinder head or cam shafts.

IMPORTANT NOTE: This kit is designed to remove seized injectors only. Using this kit will render any injector inoperable.

• Always ensure that the force screw is properly lubricated.
• OEM Equiv: 303-1690

A specialised kit for removing / installing the high pressure fuel pump from the drive gear on Ford 2.0L EcoBlue diesel engines (2016 onwards), including Ranger Raptor (2018-).

• Applications: Ford Transit VN | VO, Everest UA, Ranger PX, Ranger Raptor
• Engine codes: YMF6 | YN2S | YNF6 | YNPT | YNWS
• OEM Equiv: 303-1635/1 | 303-1635/2 | 303-1635/3 | 303-1635/6

This timing kit has been designed for late model Ford 2.0L EcoBlue engines in the Ford Transit (2016 >) which have the belt in oil design whereby the drive belt is located inside the oiled area on the engine.

• Application: Ford Transit (YN | YO)
• Engine codes: YMF6 | YNF6 (2016 onwards)
• OEM Equiv: 303-1637 | 303-1643 | 303-1650 | 23-019

A specialised tool for removing the vibration damper pulley on 2.0L EcoBlue engines fitted in the Ford Ranger | Kuga | Transit, from 2019. Allows for safe removal without damaging the bonded rubber section. Ensure that thrust screws are suitably greased, in accordance with manufacturer specifications.

• OEM Equiv: 303-1657
• Application: Ford Ranger | Transit | Transit Custom
• Engine: 2.0L EcoBlue | YN2S

A specialised diesel injector puller designed to allow injectors on Ford 2.0L EcoBlue engines to be removed in our piece, so that they can be retrofitted.

• Applications: Ford 2.0L EcoBlue engines
• OEM Equiv: 303-1706

Specialised locking tool for Ford Transit (2.2L) and Ford Ranger (3.2L) Puma engines. Allows for the removal of the chain driven high pressure diesel fuel pump while maintaining engine timing / timing chain position.

Use with ET1311 and ET9161.

• OEM Equiv: 303-1317

This timing tool kit is designed to locate the crankshaft / flywheel to set the TDC sensor position when servicing the cam chain drive system. Applications include ECOnetic and HDT engines.

The L shaped locking key in this key is designed for manual transmissions. For automatic transmissions refer ET9423 (which is included in this kit).

• Applications: Transit 2.2 (06-) | Ranger (11-) Econetic & HDT engines | Mazda BT-50 (11-16)
• OEM Equiv: 0188H | 303-698 | 303-1587 (49 UN30315870)