This set locks / holds the flywheel in position to allow the release of the crankshaft pulley screws during timing belt replacement. It has the same functions as ET1574 but with the extra locking adaptors expanding its use on a larger model group in the Ford petrol & diesel engine range.

• Applications across a wide range of Ford engines especially: Diesel 1.8TDdi / TDCi 2.0TDCi, Petrol: 1.6Ti-VCT | later 1.25L / 1.4L 16v Duratec
• Adaptor lengths: 11mm | 29mm | 42mm

An essential kit for locking camshafts / crankshafts / timing covers on Ford / Volvo. Plus Mazda crankshaft pulley holder

This kit suits those engines where one camshaft is longer than the other one.

For securing the cylinder head, and camshaft / crankshafts during servicing of cylinder head assemblies on 4 | 5 | 6 cylinder engines.

This kit has all the tools required for cam replacements and head rebuilds on Volvo 2.5L petrol engines.

• Engine codes: VOLVO B41XX | B42XX | B52XX | B62XX | B63XX, FORD: B5254T
• Volvo OEM Equiv: 9995451 | 9995454

This modest little set is designed for the 2.0L / 2.2L DOHC common rail diesel engines in Ford, Land Rover, Peugeot & Volvo vehicles.

It allows the camshaft pulley to be locked using the timing pin while securing the flywheel / ring gear with the locking pin & plate. The cam belt transmits drive from crankshaft to camshaft then from one camshaft to the other by chain located in the cylinder head.

• OEM Equiv: 303-393 | 303-393-01 | 303-1059 | 303-1277

This kit locks the camshaft during timing belt replacement over the complete range of Ford Duratec engines in both belt & chain drive variants.

• Applications: Wide range of Ford | Mazda | Volvo vehicles with 1.25L | 1.4L | 1.6L 16v Ti-VCT engines plus 1.8L | 2.0L | 2.3L 16v engines.

Specialised kit for holding camshafts in the correct position while installing the front crankshaft oil seal, and while setting the tappets.

Designed for use with 2.5L 20V DOHC petrol engines fitted to Ford Focus, and various Volvo vehicles.

• OEM Equiv: 303-1180 | 303-1183 (999 5765)
• Engine codes: B5254 | HYDA

Locks camshafts in their timed position, when there is a need to remove the variable valve timing pulleys.

Use with ET0512.

• Applications: Ford Fiesta | Focus, Volvo V40 | S60 | V60
• Engine codes: Ford HXDA | HXJA | JQMA | PNDA | U5JA, Volvo B4164T
• OEM Equiv: 303-1552

This kit is required to replace camshaft timing belt on chain drive valve timed engines (97-09).

Use with ET1374.

These engines have a belt to drive the camshaft and a chain to drive the pump. This kit is designed for the chain, and removes the injection (high pressure) fuel sprocket and the timing chain front cover.

• Includes injection / high pressure pump sprocket holder and timing chain cover alignment tools

A specialised tool for removing / installing dual clutch transmissions on Ford | Volvo engines.

• OEM Equiv: Ford 308-763 | Volvo 9997435

Essential new tool for removal of BM5G-9F593-BA / CM5G-9F593-BA injector nozzles on Ford EcoBoost GDi engines.

The kit is designed for engines up to 2.0L. The split collet (with its slim design) fits down over the injector. Turn to securely grip the injector, then extract with the slide hammer.

• OEM Equiv: 310-206 (9997410)

A master kit for installing stretch style multi ribbed drive belts.

These belts do not require an idler, but they do need special tools for convenient, and safe assembly.

Models:

• Audi: A3
• BMW: 318 | 320 | 325 | 330 | 335 | 520 | 525 | 530 | 535 | 635 | 730 | X3 | X5
• Chrysler: Grand Voyager | Voyager
• Citroen: C2 | C3 | C4 | Jumper | Relay
• Fiat: Albea | Doblo | Ducato | Fiorino | Linea | Marea | Multipla | Palio | Qubo | Siena | Stilo | Strada
• Ford: C-Max | Courier | Fiesta | Focus | Fusion | Mondeo | Tourneo | Transit
• Iveco: Daily
• Seat: Altea | Ibiza
• Skoda: Octavia | Yeti
• Mazda: 2 | 3 | CX-5
• Mercedes: Sprinter | Viano | Vito
• Peugeot: 206 | 207 | 307 | Boxer
• Volvo: C30 | S40
• VW: Eos | Golf | Jetta | Passat | Polo | Scirocco

A specialised timing kit for Volvo D4204T engines. This kit comprises the ET1574 kit, plus an additional camshaft / crankshaft locking pin not included in that kit.

• Engine code: D4204T
• OEM Equiv: 999 7119 | 999 7120 | 999 7121 | 999 7122

A comprehensive diesel locking pin set for changing the cam belt on single / twin cambelted 2.0L | 2.4L 5 Cyl engines and 1.6L | 1.9L | 2.0L 4 Cyl diesel engines.

The kit provides the locking tools required for both timing belt change and the dismantling of the gear driven cams fitted to the twin cam engines in the Volvo range.

Applications: C30 | C70 | S40 | S60 | S80 | V50 | V60 | V70 | XC60 | XC70 | XC90

Engines: 2.0L 5 Cyl, 1.6L | 1.9L | 2.0L 5 Cyl

OEM Equivalents & Engine Codes:

• ET0379-25: VAG T10264
• TT7121: Ford 303-734, Volvo 999-7169, Land Rover 21-262, Mazda 49JE02-020, PSA 0194-C
• TT0732: Ford 303-732, Volvo 999-7169, Honda 07744-0010400, PSA 0194-A, BMW Mini 11 9 790, Suzuki 09910-05410, Mazda 49JE02-018
• TT7007: Volvo 999 7007
• TT0190: Ford 303-735, Volvo 999 7122, Land Rover 21-263, PSA 0188M, Renault MOT 1430, Mazda 49JE02-021, PSA 0194-B, BMW 11 0 790, PSA 0189B
• TT7006: Volvo 999 7005
• D5204T2 | D5204T3 | D5244T | D5244T10 | D5244T11 | D5244T13 | D5244T14 | D5244T15 | D5244T16 | D5244T17 | D5244T18 | D5244T19
• D5244T2 | D5244T3 | D5244T4 | D5244T5 | D5244T6 | D5244T7 | D5244T8 | D5244T9 | D5204T | D4164T | D4162T | D4204T | D4204T2
• D5204T2 | D5204T3 | D5244T | D5244T10 | D5244T11 | D5244T13 | D5244T14 | D5244T15 | D5244T16 | D5244T17 | D5244T18 | D5244T19 | D5244T2 | D5244T3 | D5244T4 | D5244T5 | D5244T6 | D5244T7 | D5244T8 | D5244T9 | D5204T | D4164T | D4162T | D4204T | D4204T2