A specially designed tool for use on dry type transmissions to remove / install oil seals on Ford / Volvo vehicles with a DPS6 / DCT650 transmissions.

• Transmissions: DPS6 | DCT250
• Applications: Fiesta (11-18) | Focus (10-18) | Focus RS (16-18)
• OEM Equiv: 307-671 | 307-672 | 307-673 | 307-674

A specialised tool for removing the sensor module connector on 0B5 transmissions (7 speed DCT with wet clutch). To use, simply connect the socket to the housing, turn anti-clockwise, then remove the connector housing.

• Applications: 0B5 transmissions
• Vehicles: Audi A4 (08-) | A5 Cabriolet (09-) | Q5 (08-) | A5 Coupe (08-) | A5 Sportback (08-) | A7 Sportback (11-)
• OEM Equiv: T40228

Developed to remove and install the clutch cover with the sealing ring on the shaft, ensuring accurate alignment and a secure fit.

• Suitable for use with various BMW models, including the 2008-2014 M3, 135i, 335iS, F10 M5, and F12/3 M6 equipped with DCT transmissions

The ET1566A Clutch Installer is a specialised tool designed for the removal and installation of dual clutches, specifically engineered to be equivalent to OEM code 230400. This tool is essential for automotive professionals working with BMW GS7D36SG (DKG) transmissions.

• OEM Equiv: 23 0 400 (230400)

The ET1566C DCT Output Shaft Seal Tool is an essential tool for automotive professionals working with dual-clutch transmissions (DCT). This tool is specifically designed to facilitate the installation of the output shaft seal, ensuring a precise and secure fit

• Suitable for use with various BMW models, including the 2011-2014 135i, 335iS, F10 M5, and F12/3 M6 equipped with DCT transmissions

For GA6HP19Z / GA6 HP19Z / GA6L45R gearboxes.

• E90, E91, E92, E93, E70, F20, F21, F22, F23 models, with N51, N52, N55, M57 engines
• OEM Equiv: 241370 | 83300495486

A specialised clutch alignment tool for installing new clutches in manual transmissions on BMW Mini vehicles.

Designed for use on SAC type clutches where larger tapered tools will not fit.

• Applications: Mini Cooper JCW/S (11-15) | JCW ALL4/S (11-16)
• Engines: N18 (1.6L petrol) | N47 (1.6L / 2.0L diesel) with Getrag 6 speed gearbox & SAC type clutch
• OEM Equiv: 210000 | 83300496779)

A professional grade in-hex metric impact socket, designed for use with air / powered tools. This socket has a 1/2" Sq Drv. Part of the Endeavour range of specialty bits and sockets.

• 5mm in-hex impact socket
• 78mm overall length
• 1/2" Sq Drv

A special socket for removing / installing the wheel screws on certain Porsche 911 / 991 vehicles (2012 - 2020).

• Applications 911 Carrera 4 GTS (2012) | 911 Carrera GTS (2011-2012) | 911 GT2 (2008-2009) | 911 GT2 RS (2011) | 911 GT3 (2010-2011, 2014-2015) | 911 GT3 RS (2011) | 911 GT3 RS 4.0 (2011) | 911 Turbo (2007-2015) | 911 Turbo S (2011-2016) | 991 GTS (2014-16)
• Aluminium alloy
• 3/4" Sq Drv

A DSG clutch removal tool set for the safe removal and refitting of twin plate clutches used in VAG 6/7 speed electronically controlled dual clutch manual gearboxes.

For Gen 2 assemblies (2011 onwards), you will also require a shim spacer (ET1552B). To remove the Mechatronic unit refer ET1552C.

• For 0AM / 08D gearboxes on Golf, A3, Touareg etc
• OEM Equiv: T10323 | T10373 | T10374 | T10376

A time saving device for assisting in the removal / installation of 7 speed dual clutch gearboxes (S-Tronic). The tool clamps onto the clutch input shaft, in order to efficiently remove the assembly.

• Models: Audi A4 FWD | Audi A8 (03 onwards) | Audi A6 (05 onwards)
• Automatic 09E 4 WWD transmissions
• OEM equiv: T40123A