This extended kit combines the ET1125 and ET1374 providing necessary locking tools / timing belt tensioners for a wide range of Duratec petrol belt / chain driven engines. The kit can also be used for adjusting the VCT unit.

For new high efficiency 4 cylinder petrol turbocharged engines with variable valve timing fitted to Ford / Volvo vehicles.

Also refer ET5412 camshaft setting bar.

• Applications: Ford Fiesta WZ | Focus LW | Kuga TF | B-Max | C-Max, Volvo S60 | V60
• Engine codes: B4164T | JTJA | PNDA | PNPT

This set locks / holds the flywheel in position to allow the release of the crankshaft pulley screws during timing belt replacement. It has the same functions as ET1574 but with the extra locking adaptors expanding its use on a larger model group in the Ford petrol & diesel engine range.

• Applications across a wide range of Ford engines especially: Diesel 1.8TDdi / TDCi 2.0TDCi, Petrol: 1.6Ti-VCT | later 1.25L / 1.4L 16v Duratec
• Adaptor lengths: 11mm | 29mm | 42mm

Essential tools for setting and locking the engine, and for setting the position of the variable cam timing units on Ford 1.0L Ecoboost engines.

• Applications: Ford Fiesta WZ | Focus LZ | EcoSport BK
• OEM Equiv: 303-732 | 303-1064 | 303-1065 | 303-1602 | 303-1604 | 303-1606

A wide ranging kit of diesel & petrol engine timing tools for cam belts, chains & gears fitted in Ford vehicles including TDDi / TDCi / Duratorq as well as Ford Galaxy with VW engines.

Locks / holds camshaft & crankshaft when servicing the timing chain on 4.0L 12V SOHC engines used in Ford / Land Rover / Mazda vehicles.

• Applications: Ford Courier (05-06), Explorer (96-08) | Mazda B4000 Bravo | Land Rover Discovery 3 (05-09)
• OEM Equiv: OTC 6488 (303-564 | 303-565 | 303-571 | 303-573 | 303-575 | 303-576 | 303-577 | 303-578)

This kit suits Ford F150 | Mazda CX-9 vehicles, and is used to hold the camshafts in position when setting the timing. Includes camshaft holding fixtures and chain tensioner hold down tool.

• Applications: Ford F150 | Mazda CX-9
• OEM Equiv: 303-1248 | 303-1530

For new high efficiency 4 cylinder petrol turbocharged engines with variable valve timing fitted to Ford / Volvo vehicles.

Also refer ET5412 camshaft setting bar.

• Applications: Ford Fiesta WZ | Focus LW | Kuga TF | B-Max | C-Max, Volvo S60 | V60
• Engine codes: B4164T | JTJA | PNDA | PNPT

For securing the cylinder head, and camshaft / crankshafts during servicing of cylinder head assemblies on 4 | 5 | 6 cylinder engines.

This kit has all the tools required for cam replacements and head rebuilds on Volvo 2.5L petrol engines.

• Engine codes: VOLVO B41XX | B42XX | B52XX | B62XX | B63XX, FORD: B5254T
• Volvo OEM Equiv: 9995451 | 9995454

This modest little set is designed for the 2.0L / 2.2L DOHC common rail diesel engines in Ford, Land Rover, Peugeot & Volvo vehicles.

It allows the camshaft pulley to be locked using the timing pin while securing the flywheel / ring gear with the locking pin & plate. The cam belt transmits drive from crankshaft to camshaft then from one camshaft to the other by chain located in the cylinder head.

• OEM Equiv: 303-393 | 303-393-01 | 303-1059 | 303-1277

This kit locks the camshaft during timing belt replacement over the complete range of Ford Duratec engines in both belt & chain drive variants.