Testing

12-1,000V AC (50-60HZ) CAT IV Adjustable sensitivity allows tracing of wires behind walls, at switches or receptacle.

All-in-one driver box to test all petrol injectors including the latest GDI Piezo injectors. Plus diesel injectors.

Ideal for bench testing injectors to see if they are opening correctly. Also use in conjunction with ultrasonic cleaners to better clean internal parts, or with injector nozzle tester to test spray pattern.

• Automatically detects injector type
• From 1Hz to 20Hz adjustable
• Supplied with 6 adaptors to connect to a fuel rail of a traditional petrol PFI injector tester
• Signal output cords for both petrol / diesel injectors
• Powered by 240V adaptor (not shown)

This petrol injector test kit contains an extensive range of adaptors giving it universal application for Asian / European / US vehicles.

This kit is ideal for testing Bosch CIS, GM TBI and other fuel injection systems. However please note that it is not suitable for GDI systems.

• Large 3" gauge (0-100PSI / 0-700kPA)
• Quick coupling design

Test and diagnose most systems that require pressure or vacuum to operate. Transfer fluids. One person brake bleeding

• Comprehensive adaptor kit included
• Range -30 to 30 PSI

Replacement reflective strips for use with non contact tachometers.

Replacement straight probe for the ET3426 / ET3426A kits.

Suits most passenger vehicles. Two gauges (0-100 PSI / 0-500 PSI) for low / high pressure ranges.

Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks.

• Includes 3 pairs of stepped adaptors to fit most sizes found on commercial vehicles.
• Includes pressure gauge, shut off valve, and pressure release valve.
• Adaptor sizes: 105 - 130mm

Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks. Simply pressurise using shop air.

The maximum pressure in most turbo systems is approximately 15 PSI - 25 PSI. When connecting the airline to these test caps, always regulate air pressure in the test to 25 PSI maximum. Over pressurisation will damage system components.

A graduated approach to leak testing is recommended. Start with 5 PSI to find large leaks, and progressively increase in 5 PSI increments.

• Kit includes 4 pairs of stepped adaptors to fit most sizes found on passenger vehicles.
• Includes pressure gauge, shut off valve, and pressure release valve.
• Adaptor sizes: 35-90mm

Safely test voltage up to 1000V AC / DC. Able to verify the absence of voltage even with discharged batteries.

• Conforms with EN 61243-3. CAT III 1000V / CAT IV 600V
• LED indication range: 12V - 1000V AC / DC
• LCD indication range: 6V - 1000V AC / DC
• Rugged double insulated wire
• Continuity / Diode test

A handy tester to detect faulty components in vacuum systems as well as mechanical fuel pumps.

• Large 62mm diameter gauge
• Pressure: 0-10 PSI (0-70kPa | Vacuum: 0-30 In-Hg (0-100 kPa)
• 750mm rubber hose

Dual function (vacuum / pressure) kit with wide applications. Test vacuum systems. Transfer fluids. Bleed brakes.

• Test fuel, ignition, transmission, emission, air conditioning systems
• Comprehensive adaptor kit included
• Range: -30 to 60 PSI

Creates and holds a metered vacuum. Applications include one-man brake bleeding, vacuum testing and pressure testing fuel systems.

Brake bleeder & connector pack included.

• Switch air intake control valve: In - for testing vacuums | Out for pressurising systems
• 0 - 60 PSI (0- 4 Bar) pressure range
• 0 to -30 vacuum range

Replacement wire piercing probe for the ET3426 / ET3426A kits.