The Power Probe 4 Master Combo Kit combines the Power Probe 4, ECT3000 and various accessories to provide the ultimate combination of diagnostic and circuit-testing capabilities.

The Power Probe 4 provides simplified testing of Motors, Lights, Relays, and Sensors, and even Fuel Injectors. Also, like all Power Probe circuit-testers, it supplies Power and Ground for functional component testing on or off the vehicle. The ECT3000 will help you trace short and open circuits quickly and accurately.

The DM300AUTO is much more than a complete True RMS Digital Multimeter. It also includes several other functions of great utility for professionals in the automotive sector, such as checking the status of fuse protection, providing out of spec reading alerts, detecting parasitic draw, guiding automotive tests, checking the correct charging process of the alternator and measuring possible cranking voltages in the supply circuit.

The TFT colour display and the user friendly menu make this instrument an indispensable tool for automotive professionals.

• Measures current Flowing through fuses without removing the fuse (up to 80A)
• Fuse Voltage drop testing
• Guided automotive test such as Cranking Voltage / Alternator Charging
• AC/DC Voltage measurements up to 1000V
• Current measurements up to 30A
• Measures resistance, continuity and diode testing
• Frequency and duty cycle for PWM signals

Advanced multi function tester supplied with inter changeable connectors. Voltage supply 8-30V.

A handheld diagnostic tool designed to test circuits / electrical connections.Operates from 3-48V. Includes probe adaptor for testing terminal connections.

An extension cable for the ET0700. Ideal for working on trucks/rear of vehicle.

The perfect electrical circuit test assistant! Get the job done with ease!

Compatible with standard 4 and 5 terminal relay circuits and can be used with most car makes and models. The RelaySim Pro can energise any relay that powers DC electric motors, fuel pumps, cooling fans, blower motors, window motors, and any other motor actuated by a relay), headlights, and other car lighting applications or almost all electrical actuators, such as electromagnetic, electromechanical, and electrohydraulic. Additionally, it can be used in series (in place of a fuse) with most other circuits rated for 25A or less. The device is suitable for both 12-volt and 24-volt systems and does not limit the operating current range. The operating range for continuous usage is up to 21 amps. The device supports a maximum surge of 27 amps, regardless of whether the voltage is 12V or 24V. Two LEDs (85 and 86 terminals) indicate voltage, polarity, and continuity in the relay coil circuit.

RelaySim Pro has a built-in dual high-definition LCD digital display that allows you to observe the current and voltage values in the circuit under test. The device measures the current flowing through the 87 or 87a circuit, depending on which one is currently activated. Also, it measures and displays voltage for circuits 85, 86, 87, 87a, and 30. You can directly observe the amperage and voltage going into an activated circuit, allowing you to assess the load's health. If an actuator is drawing more current than specified, or the current load is inconsistent during operation, the load/actuator is suspect and should be replaced.

• Suits 12V and 24V applications
• Separate control of the 87 and 87a relay circuit
• Integrated a dual high-definition LCD digital display
• Built-in DC ampere meter 0...50A
• Up to 21 amp operating current (for both 12V and 24V applications. See the specs for more details)
• Measurement of the current through the activated circuit
• Built-in DC voltage meter 0...199.9V
• Independent voltage measurement on each relay terminal
• Open load detection in OFF-state
• Flags a fail event (Status LED)

Check circuits on all 6V & 12V systems. 70mm insulated probe, with 3.6m retractable cord.

• 70mm insulated probe
• 3.6m retractable cord

This circuit tester is designed for sensitive circuits such as injector pulse, and automotive computer circuits.

Operates from 3-15V (for 6 - 12V systems). Handle glows red for positive polarity, and green for negative polarity. Supplied with 48" ground wire.

• 3 - 15V voltage range
• 75mm probe length