Turbo System Leak Detector

Commercial Vehicles
SKU: ET5493

Automotive

$329.00
In Stock

Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks.

  • Includes 3 pairs of stepped adaptors to fit most sizes found on commercial vehicles.
  • Includes pressure gauge, shut off valve, and pressure release valve.
  • Adaptor sizes: 105 - 130mm

SKU ET5493
Barcode # 9321280360501
Brand Automotive
Product weight 4.1100kg
Shipping weight 4.460000kg

12 Months

Calculate Shipping



Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products


Others also bought


Promo
Track Rod End Socket | 49mm | 1/2" Sq Drv

Track Rod End Socket | 49mm | 1/2" Sq Drv

After separating the ball joint from the steering knuckle, simply slip over tie rod end and remove. This socket has almost universal application for most cars and some light commercial vehicles.

  • Inner dia: 49mm | U-opening: 34x18.5mm
  • Length: 57.5mm
  • 1/2" Sq Drv

Promo
Turbo System Leak Detector Turbo System Leak Detector

Turbo System Leak Detector

Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks. Simply pressurise using shop air.

The maximum pressure in most turbo systems is approximately 15 PSI - 25 PSI. When connecting the airline to these test caps, always regulate air pressure in the test to 25 PSI maximum. Over pressurisation will damage system components.

A graduated approach to leak testing is recommended. Start with 5 PSI to find large leaks, and progressively increase in 5 PSI increments.

  • Kit includes 4 pairs of stepped adaptors to fit most sizes found on passenger vehicles.
  • Includes pressure gauge, shut off valve, and pressure release valve.
  • Adaptor sizes: 35-90mm

Promo
Isuzu 4JJ1 Crankshaft Rear Oil Seal Installer Isuzu 4JJ1 Crankshaft Rear Oil Seal Installer

Isuzu 4JJ1 Crankshaft Rear Oil Seal Installer

A specialised tool for quickly / safely installing rear oil seals on Isuzu trucks with 4JJ1 engines. An essential tool to avoid damaging oil seals during installation. This tool is designed to suit a wide range of early model Isuzu vehicles with 4JJ1 engines. For late model (2013 onwards) vehicles, refer ET1726B.

  • Applicable: Isuzu 3.5 Ton Mu / NKR69 / NKR77 / NLR85 / NNR85 | Holden: Rodeo / Jackaroo / Colorado RC (2WD / 4WD / MY10) 07/08 - 05/12; 3.0L 4JJ1-TC,4JJ1-TCX DOHC 16V CHAIN DRIVE TURBO DIESEL)
  • Engine codes: 4JB1 | 4JG2 | 4JH1 | 4JH1-TC | 4JJ1 (130 / 150hp) | 4JJ1-TCS | NKR | NKR77
  • Genuine seal numbers: BZ4962-E | 8-9707-1561-1

Promo
Smoke Leak Detector | EVAP & Turbo Smoke Leak Detector | EVAP & Turbo

Smoke Leak Detector | EVAP & Turbo

Quickly find leaks in both engine and turbo systems. Built in air compressor / light weight / powered from 12V battery.

  • Pressure range: 0.5 - 17 PSI (adjustable)
  • Use with supplied fluid (50ml), or optional dyes
  • 12 month warranty
  • Built in air compressor!
  • Includes accessory kit!

Promo
SmokeMan High Pressure Smoke Machine SmokeMan High Pressure Smoke Machine

SmokeMan High Pressure Smoke Machine

Heavy vehicles require higher capacity smoke machines. The new SmokeMan HD delivers up to 120 PSI max pressure. Test more than just engines. Check for leaks on small water tanks, air tanks, braking systems etc...

  • Both flow and pressure control
  • Up to 120 PSI max pressure (compressed air required)
  • Heavy vehicle adaptor set included
  • Dual gauges - Test and System Pressure
  • 12 month warranty

Promo
SmokeMan Leak Detection Fluid | 250ml

SmokeMan Leak Detection Fluid | 250ml

Specialised fluid for smoke machines, designed to produce a dense smoke. Compatible for use with most smoke machines, including our ET6610, ET6620 and ET6630.

Designed to leave no residue / produce less odour than using baby oil.

  • 250ml container


More from this category


Promo
12V Brake & Clutch Pressure Bleeder | Digital

12V Brake & Clutch Pressure Bleeder | Digital

Single handed brake bleeding. Powered by the vehicle's own battery. No shop air required!

  • Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
  • Auto shut off function when pressure falls below 0.5 bar.
  • Includes premium adaptor kit

Promo
25Nm Torque Adaptor (3/8" Sq Drv)

25Nm Torque Adaptor (3/8" Sq Drv)

Achieve perfect torque every time with this versatile and reliable torque adapter. The ET1234 Torque Adapter is a precision tool designed to prevent over-tightening of delicate components, such as plastic and aluminum oil filter canisters and filters, and sump plugs etc. It converts any 3/8" drive ratchet or breaker bar into a 25 Nm torque wrench, ensuring accurate tightening to manufacturer specifications.

  • Accurate Torque Control: Converts any 3/8" drive ratchet or breaker bar into a precise 25 Nm torque wrench. Protect components from damage caused by over tightening.
  • Durable Construction: Built with high-quality materials to ensure long-lasting performance.
  • User-Friendly Design: Simple to attach and use with a 3/8" drive tool.
  • Not for use with impact / pneumatic tools.

Bonus
ET3204-200
Promo
2L Ultrasonic Cleaner

2L Ultrasonic Cleaner

Discover the power of precision cleaning with ultrasonic cleaners! These cutting-edge devices use high-frequency sound waves to effortlessly remove dirt, grime, and contaminants from even the most delicate surfaces. Perfect for jewelry, eyeglasses, medical tools, and more, ultrasonic cleaners deliver professional-level results in minutesÑall from the comfort of your home or workspace. Say goodbye to tedious scrubbing and hello to sparkling perfection.

  • Die cast 304 stainless steel tank
  • 0-80¼C temperature range
  • 1-99 minutes working time
  • 60W ultrasonic cleaning power
  • 40KHz for intensive rinse
  • Tank size: 150 x 140 x 100mm
  • Tank capacity: 2 litres
  • Power supply: 220V / 50Hz

Promo
5 Way Straight Manifold

5 Way Straight Manifold

5 way straight manifold designed for running multiple outlets. Robust alloy construction. Hi flow design.

  • 5 way manifold
  • 1/4" NPT connections

Promo
AC / DC 1000A True RMS Clamp Meter AC / DC 1000A True RMS Clamp Meter

AC / DC 1000A True RMS Clamp Meter

This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.

  • 30mm clamp opening
  • 1000A current AC / DC
  • 600V voltage AC / DC
  • 4000 Digital display counts
  • CAT III 600V rating

Promo
Actuator Tester

Actuator Tester

SKU: ET2130

Actuator Tester

Time saving tool for testing electronic components actuated by a magnetic field. Positive / negative sensor. Batteries included.

Test devices like ignition coil, AC generator, EGR valve controller, relay & hall effect sensors etc.

  • 2x AA Batteries included.