The ET2602 is a high-performance digital clamp meter designed for precision electrical measurements in industrial, commercial, and residential environments. Engineered with True RMS technology, it ensures accurate readings even in the presence of distorted waveforms caused by non-linear loads.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• AC / DC Current & Voltage, Resistance, Capacitance, Frequency, Duty Cycle, temperature
• CAT III 600V rating

Bluetooth Clamp Meter with Multimeter & Oscilloscope Functions

Connect up to three clamp meters to a single Bluetooth app! Ideal for diagnosing 3-phase EV motors. Offers advanced measurement capabilities with multimeter and oscilloscope functions, plus convenient data management features.

• Bluetooth Connectivity - Link up to 3 meters for simultaneous monitoring
• Rechargeable Battery - Long lasting power for field use
• 2.8" LCD Display - Clear, high resolution readout
• 38mm Jaw Opening - Suitable for large conductors
• Measurement Range:
• 1,000V AC/DC
• 1,000A AC/DC
• Resistance, Capacitance, Frequency, Duty Cycle
• Oscilloscope - 1 channel, 1kHz bandwidth, 5.0MSa/s sampling rate
• Data Features - Read offline recordings, view data charts, share recordings, and set threshold alarms for proactive diagnostics

The Power Probe PP3EZKIT is an all-in-one automotive diagnostic kit designed to streamline fault-finding and component testing. It allows you to power up and activate components directly, trace wiring and circuit faults with precision, and expand troubleshooting capability using advanced probe tips and accessories. Ideal for fast, accurate electrical diagnostics across modern vehicle systems.

• Quickly Locate Short and Open Circuits - pinpoint wiring faults with speed and precision, drastically reducing diagnostic time.
• Complete Diagnostic Kit - Includes both the PP3EZ Power Probe for activating and testing circuits and the ECT3000 Circuit Tracer for fault finding in hard to reach wiring, providing a comprehensive all in one testing solution.
• Activate Components with Power or Ground - apply power or ground directly to components, enabling instant functional checks without back probing or jumper wires.
• Includes Tip Adapters - two essential adapters for current measurement (PPAMP) and PWM signal testing (PPPWM), expanding diagnostic capability for modern automotive systems.
   

This test performs leak down tests which can be more accurate than normal compression tests.

Leak down tests can be used to detect various engine faults including leakage past rings, head gaskets, intake / exhaust valves etc.

• Requires air source of 70-160PSI, as the unit will pressurise system to 60PSI.
• Spark plus thread hoses: 10, 12, 14mm | regulator & o-rings

This kit contains a special cap, and gauge in order to test oil pressure on a range of BMW engines.

• Engines: N20 | N46 | N55
• OEM equiv: 119250

Easy to read 2-1/2" diameter gauge features colour coded quadruple calibrations. 6" heavy duty stem with universal rubber cone adaptor fits all plug holes. Convenient pressure holding side release valve. Provides an accurate reading on high performance engines.

• 0-300 PSI | 21kg/cm | 21 Bar | 2100kPA
• 13" durable rubber hose with 14mm | 18mm adaptors.

This cylinder leakage kit can diagnose a range of engine faults including blown head gaskets, cylinder head cracks, and worn piston rings / valves.

The twin gauge manifolds shows percentage of cylinder leakage, and cylinder pressure. Suitable for use on petrol engines with 10 | 12 | 14mm spark plugs.

For deeply recessed spark plugs, a long reach compression test adaptor may be required.

• Suitable for use with 10mm / 12mm / 14mm spark plugs.
• Readings: cylinder leakage / cylinder pressure (psi / bar)

Comprehensive set with adaptors to suit most common Asian / European / US vehicles. These connectors are not interchangeable with the ET7191 compression test kit.

• Normal operating range: 750PSI
• Gauge: 0-1,000 PSI

Tests return flow pressure from Bosch | Delphi | Siemens common rail injectors. Suitable for testing Piezo pass / fail statement.

• Gauges: 1-3 Bar & 1-15 Bar.
• Transparent body to check for air pockets / diesel fuel condition.