Replacement straight probe for the ET3426 / ET3426A kits.
| SKU | ET3426-SP |
| Barcode # | 9321280375185 |
| Brand | Automotive |
Consumable
You may also like
Digital LED Circuit Tester Kit
Packaged in a BMC, this circuit tester has a standard 4mm connector which can be used with standard multimeter probes.
Wire piercer / probes / alligator clip included.
- Not for use with airbags / vehicle computers.
- For use with DC voltage only.
Others also bought
Multimeter Lead Set (92 Pce)
The ET2031B Universal Line Kit is a versatile, multi function diagnostic set designed for fast, secure connection to vehicle wiring during general engine testing and circuit evaluation. It enables quick probing, signal access, and component activation across a wide range of automotive systems, making it an essential tool for efficient fault finding and reliable electrical diagnostics.
This kit comes with a bonus multimeter - offering a comprehensive diagnostic solution.- Dual-Function LED Testers - these two-way LED circuit testers allow for quick identification of power and ground signals, making fault-finding faster and more intuitive.
- Black & Red Multimeter Connector Leads - ensuring reliable connectivity for a wide range of diagnostic tasks.
- Round Terminal Adapters (Male & Female) to Banana Plug - male and female round terminal adapters connect seamlessly to standard banana plugs; ideal for interfacing with OEM wiring and connectors.
- Flat Blade Terminal Adapters (Male & Female) to Banana Plug - Includes flat blade terminal adapters for compatibility with common automotive spade connectors, improving versatility during testing.
- Variable Resistors with Banana Terminals - adjustable resistors allow technicians to simulate loads, test sensor circuits, and diagnose voltage dependent faults with confidence.
- Needle Style Piercing Probes - designed for clean, precise back-probing without damaging insulation; perfect for modern fine gauge wiring.
- Heavy Duty Alligator Clips - these rugged clips provide strong, secure connections to battery posts, chassis grounds, or test points, ensuring stable readings during diagnostic work.
Silvertronic Back Probes |
Engineered for precision diagnostics and non-invasive electrical measurements, the Silvertronic ET9432 Back Probes are high-performance test accessories ideal for automotive, industrial, and electronic environments. This professional-grade set enhances versatility and safety when probing connectors, terminals, or insulated conductors.
- 1000V CAT III 20A
- 30 cm cable
- Made in UK
- Double insulated heat resistant silicone leads
Silvertronic Professional M
The Silvertronic Professional Multimeter Lead Kit is a premium-quality test lead set designed for use with standard digital and analogue multimeters. Featuring high-quality double-insulated silicone leads, this professional kit delivers exceptional flexibility, durability, and safety for technicians, electricians, automotive specialists, and electronics professionals.
Silvertronic's premium double-insulated silicone test leads are designed to meet IEC 61010 safety requirements and are rated to CAT III 1000V.
- Back probes
- Lantern probes
- Alligator clips
- 1.2m double insulated silicone leads
More from this category
Automotive Circuit Tester
Advanced multi function tester supplied with interchangeable connectors. Voltage supply 8-30V.
Automotive Circuit Tester |
A handheld diagnostic tool designed to test circuits / electrical connections.Operates from 3-48V. Includes probe adaptor for testing terminal connections.
Automotive Circuit Tester 6m Extension Cable
An extension cable for the ET0700. Ideal for working on trucks / rear of vehicle.
CarScope Advanced Relay Tester (12V / 24V)
Test common 12V and 24V automotive relays with a repeatable diagnostic cycle. The tester identifies supported 4- and 5-pin layouts, checks coil and contact operation, and cycles each relay 10 times to help reveal inconsistent switching. Powered from the vehicle battery, it enables convenient off-vehicle testing without internal batteries.
- Tests 12V and 24V automotive electro-mechanical relays
- Supports common 4-pin and 5-pin relay configurations
- Automatically identifies pin layout and selects the test sequence
- Checks relay coil and contact switching; cycles the relay 10 times per test
- Powered from the vehicle battery; no internal batteries required
CarScope RelaySIM Pro Kit
The perfect electrical circuit test assistant! Get the job done with ease!
Compatible with standard 4 and 5 terminal relay circuits and can be used with most car makes and models. The RelaySim Pro can energise any relay that powers DC electric motors, fuel pumps, cooling fans, blower motors, window motors, and any other motor actuated by a relay), headlights, and other car lighting applications or almost all electrical actuators, such as electromagnetic, electromechanical, and electrohydraulic. Additionally, it can be used in series (in place of a fuse) with most other circuits rated for 25A or less. The device is suitable for both 12-volt and 24-volt systems and does not limit the operating current range. The operating range for continuous usage is up to 21 amps. The device supports a maximum surge of 27 amps, regardless of whether the voltage is 12V or 24V. Two LEDs (85 and 86 terminals) indicate voltage, polarity, and continuity in the relay coil circuit.RelaySim Pro has a built-in dual high-definition LCD digital display that allows you to observe the current and voltage values in the circuit under test. The device measures the current flowing through the 87 or 87a circuit, depending on which one is currently activated. Also, it measures and displays voltage for circuits 85, 86, 87, 87a, and 30. You can directly observe the amperage and voltage going into an activated circuit, allowing you to assess the load's health. If an actuator is drawing more current than specified, or the current load is inconsistent during operation, the load/actuator is suspect and should be replaced.
- Suits 12V and 24V applications
- Separate control of the 87 and 87a relay circuit
- Integrated a dual high-definition LCD digital display
- Built-in DC ampere meter 0...50A
- Up to 21 amp operating current (for both 12V and 24V applications. See the specs for more details)
- Measurement of the current through the activated circuit
- Built-in DC voltage meter 0...199.9V
- Independent voltage measurement on each relay terminal
- Open load detection in OFF-state
- Flags a fail event (Status LED)
Circuit Tester 6V | 12V
Check circuits on all 6V & 12V systems. 70mm insulated probe, with 3.6m retractable cord.
- 70mm insulated probe
- 3.6m retractable cord