This tool is designed to cut the oil filter before recycling, in order to extract any residual oil.

The tool features a two bearing design, to make it easier to rotate the oil filter. The blade is made from a hardened SKH9 steel, while the body is made from an aluminium steel alloy for lighter / more durable construction.

• The cutter incorporates a longer body to allow the unit to be used to cut oil filters with a diameter from 60mm - 140mm.

A specialised kit for removing dust / dirt / rust when reseating ABS sensors. The kit contains 5 reamers, and one drill to suit most European vehilces.

Designed for use with a 1/4" drv flexible ratchet handle (not included).

• M10 x 133mm | VAG, Holden
• M14 x 42.5mm | BMW
• M15 x 33.5mm | Mercedes, Mazda, Toyota, Ford
• M18 x 31.5mm | VAG, BMW (E36 | E46)
• M18 x 42.5mm | VAG, NFZ
• M8 x 180mm Drill | VW T5

A specialised reamer for ABS wheel speed sensors. The fixture hole should be thoroughly cleaned before replacing the sensor.

This 11mm reamer enables precise cleaning of the fixture hole, without expanding the hole diameter / damaging the sensor wheel.

• 11mm diameter reamer
• Applications: VAG, including Golf Gen 6 / 7, Audi A3, Skoda Octavia, SEAT Leon

Professional disconnect pliers for disconnecting airline quick connectors on heavy duty air brake systems. Interchangeable head allows the pliers to be used on a wide range of connectors.

• Disconnect airlines with 6mm | 8mm | 10mm | 12mm diameter

For Bendix brakes that have a return spring hooking over a post. The socket end removes springs by rotating the hook post off. The opposite end leverages spring onto post.

• Equivalent to Bendix S13P

This file is designed for removing corrosion, road dirt, brake dust etc from calipers / carriers when replacing brake discs / pads. The reverse blade also functions as a scraper for harder to remove residue.

• Flat 155mm parallel blade with diagonal coarse grooves to reduce clogging.
• Extra slim 10mm style, especially useful on Japanese vehicles with narrow caliper carriers.
• Double sided for easy use.

A handy set of three different pairs of brake caliper hooks. These hooks are ideal for hanging components such as brake calipers, coolant hoses, engine cables, fuel lines etc so that they are not damaged during service.

• Small rigid (red coated) hooks - 160mm long x 6mm dia
• Large rigid (red coated) hooks - 210mm long x 8.3mm dia
• Large flexible (green coated) hooks - 210mm long x 8.3mm dia