Combination Budd wheel nut socket. Extra deep design for removal of nut / stud. Impact grade for use with impact wrenches.

Primary applications include front / rear axles on Japanese trucks (Isuzu | Mitsubishi Fuso | Hino).

• Budd wheel nut socket
• 21mm square (4 Pt) x 41mm hex
• Impact grade (Chrome Moly)
• 3/4" Sq Drv

An extra long thin wall socket for deeply recessed hub nuts. Also suitable for adjusting the free play in wheel bearings on Landcruiser / Nissan Patrol.

This socket is turned by inserting a tommy bar or large screwdriver through the cross drilled holes at the opposite end to the hexagonal head.

• 54mm dia | 6 Pt
• 165mm depth | 180mm OL
• Applications: Landcruiser 40/60/70/80/100 Series | Nissan Patrol Y60/GQ/MQ/MK.
• 1/2" Sq Drv

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

A special 4 pin impact socket for removing the rear hub nut on RWD Ford Transit (>2014). The alignment shaft allows accurate location onto the castellated nut.

• 19mm hex drive
• 6.8mm stud width
• Outer rim: 69.5mm
• OEM Equiv: 205-1007

Specialised front hub nut socket for servicing the front hub lock nut on Toyota 2WD trucks (07-). The socket has 8 pins, and is designed for use with impact tools.

• 3/4" Sq Drv
• OEM Equiv: 09318-12010 8 Pin
• Applications: 4Runner (07-14) | Sequoia (08-14) | Tundra (07-14)

An extra long thin wall socket for deeply recessed hub nuts. Also suitable for adjusting the free play in wheel bearings on Landcruiser / Nissan Patrol.

This socket is turned by inserting a tommy bar or large screwdriver through the cross drilled holes at the opposite end to the hexagonal head.

• 54mm dia | 6 Pt
• 165mm depth | 180mm OL
• Applications: Landcruiser 40/60/70/80/100 Series | Nissan Patrol Y60/GQ/MQ/MK.
• 1/2" Sq Drv

A specialised 6 point deep impact socket suitable for use on hub nuts on Peugeot vehicles.

• 40mm diameter | 6 Point
• Deep impact socket
• 1/2" Sq Drv

A specialised bi-hex deep socket that is commonly used on Ford Transit 130 | 150 | 190 vehicles (1993 onwards) and swing arm / axle nuts on Ducati / Augusta motorcycles.

• 56mm dia | 12 Point
• 3/4" Sq Drv

A thin wall hub nut socket designed to suit many applications, including 65mm Ford Transit rear hubs (before 1993).

• Size: 65mm (2-9/16") (Outside dia: 84mm)
• 6 point (single hex)
• 3/4" Sq Drv