Universal kit ideal for removing moldings / trims from almost any vehicle. Includes 11 removal tools, plus a mini trim hammer.

• Made from nylon to minimise panel damage / marking
• Supplied in heavy duty storage pouch

A handy set of plastic wedges for various bodywork tasks. The plastic wedges avoid damage to the car's paint work. Applications include the removal of mouldings / door coverings, and the application of plugs and plastic clips.

• Uni assembly wedge (190 x 30mm)
• Assembly wedge with felt surface (250 x 20mm)
• Spike assembly wedge (250 x 20mm)
• Uni wide assembly wedge (190 x 60mm)
• Special level assembly wedge (230 x 30mm)

A handy socket which is designed to be used on thread taps from M4 through M14. Versatile design also allows it to be used with reamers / screw extractors with square shanks from 5mm - 8mm across the flats.

• Stepped chuck collet design for use with a wide range of square shanks.
• Suits M4 - M14 square taps
• 3/8" Sq Drv

Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. 15mm diameter suits small pipes.

• Suitable for all Air Boy blow (and other) guns with an 8mm dia pipe.
• Actively locks onto the blow gun pipe.
• Non-marring rubber surface protects against scratching delicate surfaces.

A specialised kit for removing dust / dirt / rust when reseating ABS sensors. The kit contains 5 reamers, and one drill to suit most European vehilces.

Designed for use with a 1/4" drv flexible ratchet handle (not included).

• M10 x 133mm | VAG, Holden
• M14 x 42.5mm | BMW
• M15 x 33.5mm | Mercedes, Mazda, Toyota, Ford
• M18 x 31.5mm | VAG, BMW (E36 | E46)
• M18 x 42.5mm | VAG, NFZ
• M8 x 180mm Drill | VW T5

A specialised reamer for ABS wheel speed sensors. The fixture hole should be thoroughly cleaned before replacing the sensor.

This 11mm reamer enables precise cleaning of the fixture hole, without expanding the hole diameter / damaging the sensor wheel.

• 11mm diameter reamer
• Applications: VAG, including Golf Gen 6 / 7, Audi A3, Skoda Octavia, SEAT Leon

For Bendix brakes that have a return spring hooking over a post. The socket end removes springs by rotating the hook post off. The opposite end leverages spring onto post.

• Equivalent to Bendix S13P

This file is designed for removing corrosion, road dirt, brake dust etc from calipers / carriers when replacing brake discs / pads. The reverse blade also functions as a scraper for harder to remove residue.

• Flat 155mm parallel blade with diagonal coarse grooves to reduce clogging.
• Extra slim 10mm style, especially useful on Japanese vehicles with narrow caliper carriers.
• Double sided for easy use.

A handy set of three different pairs of brake caliper hooks. These hooks are ideal for hanging components such as brake calipers, coolant hoses, engine cables, fuel lines etc so that they are not damaged during service.

• Small rigid (red coated) hooks - 160mm long x 6mm dia
• Large rigid (red coated) hooks - 210mm long x 8.3mm dia
• Large flexible (green coated) hooks - 210mm long x 8.3mm dia