This tool is designed to cut the oil filter before recycling, in order to extract any residual oil.

The tool features a two bearing design, to make it easier to rotate the oil filter. The blade is made from a hardened SKH9 steel, while the body is made from an aluminium steel alloy for lighter / more durable construction.

• The cutter incorporates a longer body to allow the unit to be used to cut oil filters with a diameter from 60mm - 140mm.

Tufnut Security Nuts are engineered for maximum tamper resistance. Case hardened steel nuts which can be installed using regular tools, and are reusable.

• M6
• Chloride Zinc / Yellow Chromate plated
• Sold individually

An incredibly handy set of wheel nut sockets. These sockets are new half size sockets for chrome covered nuts which have become swollen / warped.

Inflated / warped chrome plated caps are a common problem, especially on some Ford vehicles. Standard sized wheel nut sockets will not fit, and a half sized variant is required.

The 19.5mm socket is designed for VW Amarok vehicles.

• Thin wall impact sockets (with protective sleeve)
• 18.5mm | 19.5mm diameter
• 6 point sockets
• 1/2" Sq Drv

An essential service tool for removing the fuel filter cartridge on various LDV vehicles and SAIC Maxus models.

According to manufacturer specifications the filter assembly must be replaced typically every 20K kms making this an essential workshop tool.

• 121mm diameter | 15 slots
• Applications: SC20M engine | D90 Pro, G10 Plus, G20, RV80, T60, T70, T90, V80, V90
• Suits OEM filter assembly: C00283549

Release automotive electrical connectors with the ENDEAVOUR Sharp Tip Electrical Disconnect Pliers. Spring-loaded action keeps the pliers ready for use, while the sharp tips help reach connector release points and the moulded handles support a comfortable, controlled grip.

• Spring loaded, for easy use
• Ergonomic molded handles for comfortable use
• Sharp tip
• 185mm overall length

Disconnect electrical connectors quickly, safely, and without damage with the Endeavour ET7070 Electrical Disconnect Pliers. Designed specifically for modern automotive electrical systems, these specialist pliers make it easy to release stubborn connector locking tabs and separate wiring harness connectors that can be difficult to access by hand. The updated serrated jaw design provides positive engagement with connector locks, allowing connectors to be released cleanly and efficiently.

• Spring loaded, for easy use
• Ergonomic molded handles for comfortable use
• Serrated tip to better grip connectors
• 215mm overall length

This tool is used to check for proper pin-fit and tension on US, European and Asian automotive electrical female terminals. This tool covers Japanese and Korean built vehicles including, Toyota, Honda, Mitsubishi, Mazda, Nissan, Subaru, Suzuki, Isuzu, Kia and Hyundai vehicles. This tool also covers US joint venture vehicles including Ford / Mazda, GM / Toyota, Ford / Nissan, and GM / Suzuki.

The tool is precision manufactured in the US. The tool has looped wires that are colour coded and the colour code chart is located on the packaging. The tool meets all RoHS requirements for all of the components and the finished product.

A must-have tool to properly diagnose electrical and electronic concerns on all common makes and models.

• Colour coded
• Made in USA
• Check socket fit condition

The ET8040 disconnect kit is designed to assist with releasing electronic connectors on Knorr Bremse EBS modules. This kit comprises 3 tools for separating 2, 4, 6 & 12 pole electrical connectors on the trailer module, as well as a tool for loosening the bayonet nut on the power supply connection.

• Ideal for tight working areas on HGV trailers
• Manufactured from steel with vinyl dipped handles for improved comfort / grip

An essential set of terminal release tools for cleaning / replacing / removing terminals from the plastic connectors on most wiring connectors without damaging them.

• 23 pce kit
• Please see download link for information on individual disconect tools
• Soft grip handles with number identification

Single face ( 3), Ladder & Knife blade tools for Asian vehicles.

• Sizes: 1.0 x 1.0mm | 1.5 x 1.0mm | 1.8 x 1.0mm | 1.5 x 0.3mm | 2.0 x 0.8mm