Disconnect electrical connectors quickly, safely, and without damage with the Endeavour ET7070 Electrical Disconnect Pliers. Designed specifically for modern automotive electrical systems, these specialist pliers make it easy to release stubborn connector locking tabs and separate wiring harness connectors that can be difficult to access by hand. The updated serrated jaw design provides positive engagement with connector locks, allowing connectors to be released cleanly and efficiently.

• Spring loaded, for easy use
• Ergonomic molded handles for comfortable use
• Serrated tip to better grip connectors
• 215mm overall length

Keep common mini blade fuse ratings on hand with the ENDEAVOUR 96-piece SAE-compliant kit. It includes 3A, 5A, 7.5A, 10A, 15A, 20A, 25A and 30A fuses for replacement in compatible automotive circuits.

• 3A | 5A | 7.5A | 10A | 15A | 20A | 25A | 30A

A popular assortment of glass | mini blade | standard ATS blade fuses packed in a transparent plastic case.

• 360 pcs

A stable power supply is essential when flashing / reprogramming / calibrating ADAS. This unit outputs 100A indefinitely, with variable voltage. Plus functions as a 60A battery charger.

Based in Kansas USA, Clore has a 50 year heritage in developing battery technology for automotive professionals.

• 100A battery stabiliser
• 13.1V - 14.9V (0.1V increments)
• 60A / 40A / 10A battery charging modes
• Extremely low peak to peak ripple voltage
• Adjustable voltage output 13.1~14.9v
• 7-phase battery charging sequence. 60A / 40A/ 10A modes
• No voltage drop
• Quick response time 8x faster than competing models
• Clean, stable power perfect for reprogramming
• 13 Ft Cables
• Winner of Motor Magazine Top 20 Tools award 2020

Disconnect electrical connectors quickly, safely, and without damage with the Endeavour ET7070 Electrical Disconnect Pliers. Designed specifically for modern automotive electrical systems, these specialist pliers make it easy to release stubborn connector locking tabs and separate wiring harness connectors that can be difficult to access by hand. The updated serrated jaw design provides positive engagement with connector locks, allowing connectors to be released cleanly and efficiently.

• Spring loaded, for easy use
• Ergonomic molded handles for comfortable use
• Serrated tip to better grip connectors
• 215mm overall length

Specialised electrical disconnect pliers for push tab fittings commonly used on Fuel Injectors, Ignition Coils, Mass Airflow Sensors etc.

• Long length swivel jaws provide access to deep seated / hard to reach connectors
• Applications include Fiat | Mercedes | VAG

Durable workshop essential designed to securely hold nuts, bolts, washers, screws, and other small ferrous parts during servicing, assembly, and repair work. Made from a high quality flexible magnetic material, the mat adheres firmly to steel surfaces and conforms easily to flat or slightly curved areas for convenient placement.

• 15 powerful neodymium magnets
• Convenient 200 x 280mm size

Disconnect electrical connectors quickly, safely, and without damage with the Endeavour ET7070 Electrical Disconnect Pliers. Designed specifically for modern automotive electrical systems, these specialist pliers make it easy to release stubborn connector locking tabs and separate wiring harness connectors that can be difficult to access by hand. The updated serrated jaw design provides positive engagement with connector locks, allowing connectors to be released cleanly and efficiently.

• Spring loaded, for easy use
• Ergonomic molded handles for comfortable use
• Serrated tip to better grip connectors
• 215mm overall length

This tool is used to check for proper pin-fit and tension on US, European and Asian automotive electrical female terminals. This tool covers Japanese and Korean built vehicles including, Toyota, Honda, Mitsubishi, Mazda, Nissan, Subaru, Suzuki, Isuzu, Kia and Hyundai vehicles. This tool also covers US joint venture vehicles including Ford / Mazda, GM / Toyota, Ford / Nissan, and GM / Suzuki.

The tool is precision manufactured in the US. The tool has looped wires that are colour coded and the colour code chart is located on the packaging. The tool meets all RoHS requirements for all of the components and the finished product.

A must-have tool to properly diagnose electrical and electronic concerns on all common makes and models.

• Colour coded
• Made in USA
• Check socket fit condition

The ET8040 disconnect kit is designed to assist with releasing electronic connectors on Knorr Bremse EBS modules. This kit comprises 3 tools for separating 2, 4, 6 & 12 pole electrical connectors on the trailer module, as well as a tool for loosening the bayonet nut on the power supply connection.

• Ideal for tight working areas on HGV trailers
• Manufactured from steel with vinyl dipped handles for improved comfort / grip

Specialised electrical disconnect pliers for push tab fittings commonly used on Fuel Injectors, Ignition Coils, Mass Airflow Sensors etc.

• Long length swivel jaws provide access to deep seated / hard to reach connectors
• Applications include Fiat | Mercedes | VAG

An essential set of terminal release tools for cleaning / replacing / removing terminals from the plastic connectors on most wiring connectors without damaging them.

• 23 pce kit
• Please see download link for information on individual disconect tools
• Soft grip handles with number identification

Single face ( 3), Ladder & Knife blade tools for Asian vehicles.

• Sizes: 1.0 x 1.0mm | 1.5 x 1.0mm | 1.8 x 1.0mm | 1.5 x 0.3mm | 2.0 x 0.8mm