Professional quality belt sanders, with JAPANESE bearings for smoother operation / extended life.

• Lightweight composite body tools.
• With safety lever
• Belt size: 10mm x 330mm

The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

Air Boy thrust guns provide a very high air flow, and offer a safe solution, as the nozzle is unblockable. The thrust nozzle increases airflow by 100% due to the venturi principle.

Air Boy thrust guns have a wide range of cleaning applications in commercial vehicles, trade and industry.

• Max 12 bar pressure
• 600 litres / min @ 8 Bar
• 98.2 dB @ 8 Bar

This tool is used to check for proper pin-fit and tension on US, European and Asian automotive electrical female terminals. This tool covers Japanese and Korean built vehicles including, Toyota, Honda, Mitsubishi, Mazda, Nissan, Subaru, Suzuki, Isuzu, Kia and Hyundai vehicles. This tool also covers US joint venture vehicles including Ford / Mazda, GM / Toyota, Ford / Nissan, and GM / Suzuki.

The tool is precision manufactured in the US. The tool has looped wires that are colour coded and the colour code chart is located on the packaging. The tool meets all RoHS requirements for all of the components and the finished product.

A must-have tool to properly diagnose electrical and electronic concerns on all common makes and models.

• Colour coded
• Made in USA
• Check socket fit condition

Say goodbye to the guesswork in electrical diagnostics. The ET7386 Short Circuit Diagnostic Kit is a professional-grade solution designed to streamline the process of tracing short circuits in automotive and electrical systems.

Manually Resettable Circuit Breaker Fuses: Includes 7 standard blade and 7 mini blade fuses ranging from 5A to 30A. These fuses trip like conventional ones but can be reset for repeated testing - no need to replace them after each fault.

• 7 standard blade / 7 mini blade resettable fuses
• Fuse ranges: 5A | 7.5A | 10A | 15A | 20A | 25A | 30A
• Includes 2x 300mm extension loops

Updated version with 'serrated' tip for better grip. Designed for disconnecting automotive electrical connectors while avoiding damaging locking tabs.

• Spring loaded, for easy use
• Ergonomic molded handles for comfortable use
• Serrated tip to better grip connectors
• 215mm overall length

Updated version with 'sharp tip' tip for better grip. Designed for disconnecting automotive electrical connectors while avoiding damaging locking tabs.

• Spring loaded, for easy use
• Ergonomic molded handles for comfortable use
• Sharp tip
• 185mm overall length

This tool is used to check for proper pin-fit and tension on US, European and Asian automotive electrical female terminals. This tool covers Japanese and Korean built vehicles including, Toyota, Honda, Mitsubishi, Mazda, Nissan, Subaru, Suzuki, Isuzu, Kia and Hyundai vehicles. This tool also covers US joint venture vehicles including Ford / Mazda, GM / Toyota, Ford / Nissan, and GM / Suzuki.

The tool is precision manufactured in the US. The tool has looped wires that are colour coded and the colour code chart is located on the packaging. The tool meets all RoHS requirements for all of the components and the finished product.

A must-have tool to properly diagnose electrical and electronic concerns on all common makes and models.

• Colour coded
• Made in USA
• Check socket fit condition

Specialised electrical disconnect pliers for push tab fittings commonly used on Fuel Injectors, Ignition Coils, Mass Airflow Sensors etc.

• Long length swivel jaws provide access to deep seated / hard to reach connectors
• Applications include Fiat | Mercedes | VAG

An essential set of terminal release tools for cleaning / replacing / removing terminals from the plastic connectors on most wiring connectors without damaging them.

• 23 pce kit
• Please see download link for information on individual disconect tools
• Soft grip handles with number identification

Single face ( 3), Ladder & Knife blade tools for Asian vehicles.

• Sizes: 1.0 x 1.0mm | 1.5 x 1.0mm | 1.8 x 1.0mm | 1.5 x 0.3mm | 2.0 x 0.8mm