A specialised kit for spreading the steering knuckle to enable the removal / installation of shock absorbers without the risk of damaging the aluminium or cast iron knuckle.
The tool is adjustable and suitable for steering knuckles with either a centralised slot or a non centralised slot.
Specially design for twin ball joints as fitted to Audi | VW control arms.
| SKU | ET7111 |
| Barcode # | 9321280325562 |
| Brand | Automotive |
| Vehicle Make | VAG |
12 Months
Others also bought
Boiling Point Digital Brake Fluid Tester
Testing brake fluid boiling point is widely regarded as the most accurate method of testing brake fluid moisture levels.
This compact unit tests DOT3 | DOT4 | DOT5 | DOT5.1.
- LCD display provides step by step instructions
- Accurate results displayed in less than sixty seconds.
- Operates on 12V supply, using vehicle's battery
Universal Suspension Split Hub Knuckle Spreader
Easily remove / install suspension struts whilst leaving the hub on vehicle. Universal design for use on most passenger cards and light commercial vehicles.
- 5 - 14mm maximum spread (reduces risk of damage to hubs)
- 17mm hex drive (use with hand tools only)
Tesla Rear Steering Knuckle Bushing Puller
A specialised suspension tool for removing Tesla Model 3 / Y rear steering knuckle bushings.
This time saving tool allows for removal / installation of bushing / ball joints without detaching the knuckle. Kit includes high strength steep press cups and threaded rods for stable and precise operation.
- Suits OE rear knuckles: 1044411-00-G / 1044411-00-F / 1288416-00-A
- OE equiv: GB0-0360 / 1188412-01-E
More from this category
BMW CV Output Shaft Kit
A specialised kit for removing / installing seized output CV shafts in wheel hubs. This kit suits many BMW vehicles, but not the E53 X5. For this vehicle, refer ET1253D.
- Applications: E30 | E31 | E32 | E36 | E39 | E46 | E52 | E53 | E60 | E63 | E64 | E65 | E66 | E67 | E83 | E85 | RR1
BMW Electric Power Steering Rack Socket
A specialised socket for servicing the electric power steering rack adjustment screw on selected BMW vehicles.
- Applications: 1 series E82, E87, E88 | 3 series E90, E91, E92,E93 | Z4, E89
BMW Lower Control Arm Caster Bush Extractor
A time saving tool for removal and reinstallation of the caster arm (thrust arm) bushing mounts on BMW 3 Series vehicles.
- Chassis: E30 | E36 | E46
BMW Steering Rack Thrust Socket
A specialised three pin socket for adjusting the EPS steering thrust piece on steering racks, applicable to many BMW and Mercedes models.
- Applications: BMW 1 series (2011>) | 3 series (2012>) | 4 series (2013>) | X1 (2015>) | X3 (10-17), Mercedes C Class (2014>) | S Class (2014>)
- Use with 28mm socket
- OEM Equiv: 32106891974 (EPS repair kit)
Hydraulic Steering System Press Kit (47 Pce)
For removing and installing bushes and bearings. The hydraulic cylinder helps save time and energy compared to manual methods.
Universal application.
- Includes M20 x P2.5 spindle
- Sleeve sizes: 18-60mm ID / 26-68mm OD, with 2mm increments
Mercedes Ball Joint Extractor
A time saving kit for removing / installing the ball joint in the steering knuckle of selected Mercedes vehicles.
- Applications: W123 | 126 | 220