A specialised kit for removing / installing seized output CV shafts in wheel hubs. This kit suits many BMW vehicles, but not the E53 X5. For this vehicle, refer ET1253D.

• Applications: E30 | E31 | E32 | E36 | E39 | E46 | E52 | E53 | E60 | E63 | E64 | E65 | E66 | E67 | E83 | E85 | RR1

A specialised socket for servicing the electric power steering rack adjustment screw on selected BMW vehicles.

• Applications: 1 series E82, E87, E88 | 3 series E90, E91, E92,E93 | Z4, E89

A time saving tool for removal and reinstallation of the caster arm (thrust arm) bushing mounts on BMW 3 Series vehicles.

• Chassis: E30 | E36 | E46

A specialised three pin socket for adjusting the EPS steering thrust piece on steering racks, applicable to many BMW and Mercedes models.

• Applications: BMW 1 series (2011>) | 3 series (2012>) | 4 series (2013>) | X1 (2015>) | X3 (10-17), Mercedes C Class (2014>) | S Class (2014>)
• Use with 28mm socket
• OEM Equiv: 32106891974 (EPS repair kit)

A time saving kit for removing / installing the ball joint in the steering knuckle of selected Mercedes vehicles.

• Applications: W123 | 126 | 220

A time saving tool which allows bush replacement to be done on vehicle without having to remove the lower control arm This kit removes / installs the front lower control arm bushes on the W170 | W202 models.

Bush replacement can be done on car without having to remove the lower control arm, allowing the job to be performed in about an hour.

• W202 Chassis (94 - 00): C180 | C200 | C220 | C230 | C240 | C250 | C280 and C36 | C43 | C43T AMG

Neon tubes glow to indicate if signal is present. Simply plug into spark leads then connect to high tension leads.

This 3/8" capacity geared pistol grip reversible drill has a handy reverse mechanism, which makes it ideal for tapping work.

• Free Speed: 2000 RPM
• Avg Air Cons: 3.9 CFM

Versatile braided recoil hose fitted with an Air Boy blow gun, and 1/4" male connector (which in turn can be fitted with any style of 1/4" female coupler).

Ideal for blowing down work places / blowing out truck cabins.

• 5m braided recoil hose
• Air Boy 124140101 blow gun

Aviation tin snips with drop forged, tempered steel blades with serrated jaws. These tin snips are self opening, with spring action handles and safety catch. Handles feature contoured grips.

• Left cut
• Finger stop tabs to prevent slippage
• 0-8.5mm Jaw opening
• 25mm Jaw width
• 250mm overall length

Easily grab onto fuel lines in one swift motion. Sockets flex at 45°. Very limited standoff from engine. Torque stays very accurate when tightening sockets to specific torque specifications

• Sizes: 11 | 13 | 14 | 15 | 17mm
• Especially useful for BMW N54 | N55 | N63 engines