A specialised three pin socket for adjusting the EPS steering thrust piece on steering racks, applicable to many BMW and Mercedes models.
- Applications: BMW 1 series (2011>) | 3 series (2012>) | 4 series (2013>) | X1 (2015>) | X3 (10-17), Mercedes C Class (2014>) | S Class (2014>)
- Use with 28mm socket
- OEM Equiv: 32106891974 (EPS repair kit)
3210 6891 974
SKU | ET7420 |
Barcode # | 9321280417601 |
Brand | Automotive |
Product weight | 0.1800kg |
Shipping weight | 0.180000kg |
Vehicle Make | BMW |
Vehicle Make | Mercedes |
12 Months
You may also like

BMW Electric Power Steering Rack Socket
A specialised socket for servicing the electric power steering rack adjustment screw on selected BMW vehicles.
- Applications: 1 series E82, E87, E88 | 3 series E90, E91, E92,E93 | Z4, E89
Others also bought

Strut Support Clamp
An essential safety tool. Locks onto gas struts during vehicle service, to enable the struts to be fixed in an extended position. Universal application for all gas struts on boots, bonnets, hatch backs etc, as the clamp simply locks onto the strut's shaft.
- Aluminium body and brass tip to prevent damage to the lift support
- Magnet to hold the tool in place while securing the clamp
- For up to 13mm struts
More from this category

BMW CV Output Shaft Kit
A specialised kit for removing / installing seized output CV shafts in wheel hubs. This kit suits many BMW vehicles, but not the E53 X5. For this vehicle, refer ET1253D.
- Applications: E30 | E31 | E32 | E36 | E39 | E46 | E52 | E53 | E60 | E63 | E64 | E65 | E66 | E67 | E83 | E85 | RR1

BMW Electric Power Steering Rack Socket
A specialised socket for servicing the electric power steering rack adjustment screw on selected BMW vehicles.
- Applications: 1 series E82, E87, E88 | 3 series E90, E91, E92,E93 | Z4, E89

BMW Lower Control Arm Caster Bush Extractor
A time saving tool for removal and reinstallation of the caster arm (thrust arm) bushing mounts on BMW 3 Series vehicles.
- Chassis: E30 | E36 | E46

Hydraulic Steering System Press Kit (47 Pce)
For removing and installing bushes and bearings. The hydraulic cylinder helps save time and energy compared to manual methods.
Universal application.
- Includes M20 x P2.5 spindle
- Sleeve sizes: 18-60mm ID / 26-68mm OD, with 2mm increments


Mercedes Ball Joint Extractor
A time saving kit for removing / installing the ball joint in the steering knuckle of selected Mercedes vehicles.
- Applications: W123 | 126 | 220

Mercedes Lower Control Arm Bush Remover
A time saving tool which allows bush replacement to be done on vehicle without having to remove the lower control arm This kit removes / installs the front lower control arm bushes on the W170 | W202 models.
Bush replacement can be done on car without having to remove the lower control arm, allowing the job to be performed in about an hour.
- W202 Chassis (94 - 00): C180 | C200 | C220 | C230 | C240 | C250 | C280 and C36 | C43 | C43T AMG