A specialised kit for setting the balance shafts on common BMW (4 & 6 cylinder) | Mini | Citroen | Peugeot petrol engine vehicles.

• Engine codes: N42 | N45 | N46 | N46T | N52
• Engine codes: BMW 1.6 (N40 / N45 / N45T, B16, B16A, B16AC) 1.8 / 2.0 (N42 / N46 / N46T) 2.0 / 3.0 (N51 / N52 / N52-Component / N53 / N54), PSA: 1.4 / 1.6 16V (EP3 / EP6 / EP6DT / EP6DTS), Mini 1.4 / 1.6 (N12 / N14)

This kit is designed to service balance shaft on Citroen | Peugeot vehicles (and BMW Mini) with 1.4L | 1.6L petrol engines (chain) when the balance shafts have been disturbed.

Also suits BMW vehicles.

• Engine codes: N40 | N42 | N45 | N46 | N46T
• OEM Equiv: 11 4 360 | 115 140 | 11 9 280 | 11 9 330

For locking intake & exhaust camshaft at TDC plus crankshaft in position for removal of crank bolt. To adjust the camshaft timing, the cam chain tensioner must be removed & adjuster centre bolts loosened to allow the crankshaft & 2 cams to be turned independently of each other so timing can be set.

ALSO suitable for Peugeot 207, 308 & Citroen C4 with EP6 DT / DTS coded engines.

• Engine codes: BMW Mini N14 (R55 | R56) | PSA EP6DT / EP6DTS

Comprehensive kit for valve timing on 1.4L | 1.6L valvetronic petrol engines. ALSO suits certain PSA engines.

A timing kit for the BMW Mini W10 / W11 1.6L petrol chain driven engines. Primary applications are pre 2009 Mini One | Cooper S models (including JC Works).

This kit enables the correct timing positions to be set on both the camshaft and crankshaft when replacing the timing chain.

• Engine codes: W10B16 | W11B16

An essential timing tool kit for BMW 1.4L | 1.6L petrol chain driven engines, as well as PSA vehicles with the EP3 | EP6 engines.

An inclinometer (ET9808) should be used in conjunction with this kit to check VVT mechanisms / chain stretch.

• Engine codes: N12 | N13 | N14 | N18 | EP3 | EP6
• Applications: BMW | BMW Mini | Citroen | Peugeot