Replacement hose assembly for the ET4086 oil extractor.

• The hose includes a suction probe with 5.6mm diameter to suit most dipstick tubes.

A specialised set of Torx Plus bit sockets / impact sockets. Torx Plus fasteners are widely used in the automotive sector, and have a six lobe design, but with a different geometry than standard Torx sockets.

This kit contains 13 sockets from size TP10 - TP80, including TP50 / TP55 which are used with late model Subaru engines.

• 3/8" Sq Drv: TP10 | TP15 | TP20 | TP25 | TP27 | TP30 | TP40 | TP45 | TP50, 1/2" Sq Drv: TP55 | TP60 | TP70 | TP80
• 48mm overall length

The ET8626 is a professional battery and charging-system tester designed for fast, accurate assessment of all 12V automotive lead acid cranking batteries - including modern stop-start types, and for evaluating 12V and 24V alternator and starting system performance. This tester delivers clear, reliable diagnostics in seconds, and the built-in thermal printer allows you to produce instant test reports for customer records or workshop documentation.

• Compatible With All Major Battery Standards - accurately tests batteries across all common industry standards, ensuring reliable results whether you're working with automotive, commercial, marine, or deep cycle 12V batteries.
• High Load Voltage Testing for 12V & 24V Systems - maximum load voltage tests on both 12 volt and 24 volt electrical systems, making it suitable for cars, trucks, machinery, and mixed fleet applications.
• Built In Short Circuit & Reverse Polarity Protection - integrated safety features to prevent damage to the tester and the battery, even if connections are made incorrectly.
• Wide 100–2,000 CCA Testing Range - enabling accurate assessments of everything from small passenger batteries to heavy duty commercial units.

The SmokeMan ET4396 is a compact, high-performance pressure brake designed for fast, clean, and reliable brake fluid exchange. This unit streamlines brake bleeding, allowing it to be undertaken by one person - no need for a second technician. Powered by the vehicle's own battery - no shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.
• Includes premium adaptor kit

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

Professional quality tester for late model trucks fitted with 7 pin type sockets. These testers are designed for testing the vehicle side socket, not the trailer itself.

There are 2 versions - for either 24N / 24S sockets.

• CANbus compatible.
• 4m cable to allow the unit to be used in the cabin.

Professional quality tester for late model trucks fitted with 7 pin type sockets. These testers are designed for testing the vehicle side socket, not the trailer itself.

There are 2 versions - for either 24N / 24S sockets.

• CANbus compatible.
• 4m cable to allow the unit to be used in the cabin.

Achieve perfect torque every time with this versatile and reliable torque adapter. The ET1234 Torque Adapter is a precision tool designed to prevent over-tightening of delicate components, such as plastic and aluminum oil filter canisters and filters, and sump plugs etc. It converts any 3/8" drive ratchet or breaker bar into a 25 Nm torque wrench, ensuring accurate tightening to manufacturer specifications.

• Accurate Torque Control: Converts any 3/8" drive ratchet or breaker bar into a precise 25 Nm torque wrench. Protect components from damage caused by over tightening.
• Durable Construction: Built with high-quality materials to ensure long-lasting performance.
• User-Friendly Design: Simple to attach and use with a 3/8" drive tool.
• Not for use with impact / pneumatic tools.