A workshop quality touch control ultrasonic cleaner. This larger size is ideal for cleaning manifolds as well as smaller parts. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 500 x 300 x 200mm
• Dual 33kHz (coarse) / 40kHz (intensive) frequency
• 600W ultrasonic power / 500W heating power
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer (1-99 minutes working time)
• Digital temperature setting (0-80 degrees C range)

Packaged in a BMC, this circuit tester has a standard 4mm connector which can be used with standard multimeter probes.

Wire piercer / probes / alligator clip included.

• Not for use with airbags / vehicle computers.
• For use with DC voltage only.

An essential diagnostic tool for testing potentially faulty electro mechanical relays. This tool tests both 12V / 24V relays, with four / five pins (not late model Ford 4 pin).

Simply plug the relay into the tester - using 12V vehicle power, the relay will be cycled 10 times with the tester applying a signal to the relay coil while checking the function of the internal contacts. The tester applies load to the internal contacts to detect excessive resistance.

• Quickly test 3 common types of electro mechanical relays
• Test relay coil resistance / relay contacts / cyclic testing
• Relay coil resistance: 20 - 500 Ohms
• Test voltage for coil: 9V
• Contact resistance threshold: 200 milliohms

Quick release impact bit holder.

This bit holder has a 1/2" Sq Drv which attaches to any suitable hand / impact tool. The bit holder holds 10mm hex bits which are commonly used in automotive applications.

• 1/2" Sq Drv
• For 10mm hex bits
• Impact grade

The Power Probe 4 is a multi-use Circuit Tester with built-in diagnostic power.

This tool simplifies the testing of fuse boxes, verifies correct operation of motors, lights, relays, sensors, wires, communications circuits and computer drivers. The large LCD colour display makes viewing live test information and mode selection simplified in even direct sunlight or complete darkness.

• Supplies Power and Ground
• Digital voltmeter with Min/Max voltage capturing
• 20 ft power lead
• Tests for bad grounds / short circuits
• Powered by vehicle battery
• Gold plated brass probe tip
• Directed LED head lamps to illuminate test area
• Ohmeter / Frequency
• Pulse width (+tive & -tive)

Additional diagnostic modes:

• Petrol fuel injection tester
• PCM / ECM driver tester
• Signal tracer (use with ECT3000)

The Power Probe Temperature Kit is designed to give readings for ambient temperature and from the wireless Temperature Probe.

The Tempkit has a built-in temperature sensor in the base unit, plus a temperature sensor in the remote wireless Probe. This allows for multiple readings simultaneously.

One additional wireless Temperature Probe (TEMPPROBE) is available separately, for a second temperature reading.

• Measuring Range: -22°C to 70°C
• Wireless Transmitter Distance: 5m (16.5 Feet)
• Accuracy ±2.0°F(±2.0°C)
• Backlit LCD Display
• Requires 2x AA and 2x AAA Batteries (NOT INCLUDED)

Test temperature & pressure of any vehicle AC system, including EVs.

Replaces manifolds & hoses! Diagnose air con systems remotely. Save time - fast setup.

View all parameters from one location - on either app, or the Kane gas analyser.

• 40 refrigerants including R134A, R1234yf & R410A
• Air Side displays return & supply measurements
• Easily set Evacuation & Rise tests values & timer
• Includes 2x wireless pressure probes / 2x wireless temperature probes

A professional quality industrial thermometer that can read up to 850 degrees celsius.

This thermometer is designed for industrial use and is not suitable for body temperature measurement.

• Automatic data hold / max temp display
• Battery included
• -50 to 850 degree C range

This infrared thermometer probe is compatible with most multimeters, clamp meters etc, including the ET2604. Ideal for applications where the object being measured cannot be touched.

• 8:1 distance to spot size ratio
• Built in laser pointer
• Being in analogue output of 1 mV/degree C
• -30 to 550 degree C temperature range
• 9V battery (supplied)

The Power Probe Temperature Kit is designed to give readings for ambient temperature and from the wireless Temperature Probe.

The Tempkit has a built-in temperature sensor in the base unit, plus a temperature sensor in the remote wireless Probe. This allows for multiple readings simultaneously.

One additional wireless Temperature Probe (TEMPPROBE) is available separately, for a second temperature reading.

• Measuring Range: -22°C to 70°C
• Wireless Transmitter Distance: 5m (16.5 Feet)
• Accuracy ±2.0°F(±2.0°C)
• Backlit LCD Display
• Requires 2x AA and 2x AAA Batteries (NOT INCLUDED)

Additional wireless probe accessory for use with the PowerProbe wireless temperature kit. This probe allows for a third zone temperature reading.

• 2x AAA batteries included
• For use with ETTEMPKIT

K type temperature probe for use with multimeters that support a temperature function.