Additional wireless probe accessory for use with the PowerProbe wireless temperature kit. This probe allows for a third zone temperature reading.

• 2x AAA batteries included
• For use with ETTEMPKIT

Connects to any Power Probe circuit tester, limiting output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles.

Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

• Current limited 5V output
• Safely test computer sensor circuits
• Provides 5V reference voltage
• 12 - 24V input
• 5V output
• Standard 4mm banana connector

The Power Probe 4 Master Combo Kit combines the Power Probe 4, ECT3000 and various accessories to provide the ultimate combination of diagnostic and circuit-testing capabilities.

The Power Probe 4 provides simplified testing of Motors, Lights, Relays, and Sensors, and even Fuel Injectors. Also, like all Power Probe circuit-testers, it supplies Power and Ground for functional component testing on or off the vehicle. The ECT3000 will help you trace short and open circuits quickly and accurately.

The Power Probe PP3EZ includes all the powerful testing modes and features of the Power Probe III plus now includes 2 new modes - EZ Learning Mode and EZ Diagnostics Mode. The PP3EZ speeds you through the diagnosing of 12 to 24 volt automotive electrical systems. After connecting the PP3EZ's clips to the vehicle's battery, the automotive technician can determine at a glance, the voltage level and the polarity of a circuit without running for a voltmeter or reconnecting hook-up clips from one battery pole to the other. The power switch allows the automotive technician to conduct a positive or negative battery current to the tip for activating and testing the function of electrical components without wasting time with jumper leads.

• New larger LCD screen
• Upside down? No problem! New flip screen feature
• Menu driven. Makes navigating a breeze

The Power Probe Maestro is a cutting edge circuit tester designed for professional automotive diagnostics. As part of the Pro Series, it features advanced multimeter functions, diagnostic modes, and an easy-to-read color LCD display housed in a rugged, dust- and water-resistant casing.

With scope-like trace mode, DC and AC voltmeter capabilities, and fuel injector testing, the Maestro simplifies troubleshooting for motors, lights, relays, sensors, wires, and communication circuits. It operates on 12V and 24V systems, offering precise voltage, resistance, and frequency measurements.

Additionally, the Maestro pairs wirelessly with the Power Probe app, enabling remote display, data streaming, and recording for enhanced diagnostics.

Files can be emailed, exported or simply saved for future reference.

Easily verify correct operation of:

• Motors
• Lights
• Relays
• Sensors
• Wires

An adaptor for measuring DC currents up to 20A (and as low as 1 milliamp). Displays current in realtime. This adaptor works with all Power Probe circuit testers!

• Measures up to 20A DC
• Measures as low as 1 milliamp
• Displays Min / Max
• Backlit LCD

This product is designed for use in monitoring car battery voltage, leakage current, and serving as a backup power supply when replacing the battery. The product is connected to the car's OBDII interface via an OBDII connection cable to supply 12V power to the car and monitor the car system's leakage current for diagnosing various faults. It can also serve as a backup power supply for the car during battery replacement, preventing the car's mainboard from losing power and data. Draw Monitor can also monitor battery voltage through the OBDII port. Please read the instruction manual carefully before using the product.

• Supplies up to 10 amps
• Connects via OBDII
• View and record data via Bluetooth on App
• USB-C rechargeable
• Adjustable current output alarm & adjustable auto power off setting
• Graphing mode
• Monitor function input: 0-30V
• Voltage display accuracy: 1%+5dig resolution 0.1V
• Current display accuracy: 3%+5dig resolution 1mA

Test temperature & pressure of any vehicle AC system, including EVs.

Replaces manifolds & hoses! Diagnose air con systems remotely. Save time - fast setup.

View all parameters from one location - on either app, or the Kane gas analyser.

• 40 refrigerants including R134A, R1234yf & R410A
• Air Side displays return & supply measurements
• Easily set Evacuation & Rise tests values & timer
• Includes 2x wireless pressure probes / 2x wireless temperature probes

A professional quality industrial thermometer that can read up to 850 degrees celsius.

This thermometer is designed for industrial use and is not suitable for body temperature measurement.

• Automatic data hold / max temp display
• Battery included
• -50 to 850 degree C range

This infrared thermometer probe is compatible with most multimeters, clamp meters etc, including the ET2604. Ideal for applications where the object being measured cannot be touched.

• 8:1 distance to spot size ratio
• Built in laser pointer
• Being in analogue output of 1 mV/degree C
• -30 to 550 degree C temperature range
• 9V battery (supplied)

Additional wireless probe accessory for use with the PowerProbe wireless temperature kit. This probe allows for a third zone temperature reading.

• 2x AAA batteries included
• For use with ETTEMPKIT

The Endeavour ET2024R is a compact, high-performance thermometer designed specifically for automotive and HVAC professionals. Featuring a 110mm foldable stainless steel probe, it delivers fast and accurate temperature readings across a wide range from -50¡C to 300¡C.

• Rechargeable Battery - say goodbye to button batteries with simple USB Type-C charging
• Fast checking of vent temperatures
• Large backlit display - easy to read in low-light environments
• IP65 waterproof

K type temperature probe for use with multimeters that support a temperature function.