Remove guesswork from modern vehicle diagnostics by putting every OBDII circuit at your fingertips. This professional breakout box gives technicians instant access to every OBDII circuit for faster fault finding, ECU testing, and network diagnostics. Whether you're diagnosing communication faults, testing CAN bus systems, performing ECU bench testing, or verifying vehicle power and ground circuits, the ET3142 provides the visibility and control that standard scan tools simply can't offer.

Featuring a built-in LCD display with real-time True RMS voltage monitoring across all 16 OBD-II pins, the ET3142 allows technicians to instantly identify power supply issues, ground faults, CAN communication activity, and wiring problems without repeatedly probing connectors. Dynamic signal detection, audible voltage alarms, and ground status indicators help reduce diagnostic time and improve accuracy.

The integrated 120 CAN termination switches make the ET3142 an invaluable tool for ECU bench testing and module diagnostics. By providing proper CAN network termination, technicians can test modules off the vehicle with improved signal integrity and confidence. Compatible with both 12V and 24V systems, it is suitable for passenger vehicles, trucks, buses, and commercial equipment.

• Real Time VRMS Voltage Monitoring - displays real time True RMS voltage on all 16 OBDII pins
• Built In CAN Termination for Bench & ECU Testing - an onboard 120 ohm CAN termination switch is ideal for situations where termination is missing such as single ECU or small bench networks.
• Intelligent Voltage Protection & Audible Alarm System - reverse polarity protection, automatic alarms for over voltage and under voltage conditions, and support for currents up to 2A, ensures that both the vehicle and diagnostic tools stay protected during testing.

Restore reliable electrical connections and eliminate troublesome electrical faults with the Endeavour ET8322 Terminal Cleaner Kit. Designed for professional technicians and automotive electricians, these diamond coated fuse terminal cleaners make it easy to clean, restore, and maintain electrical terminals, connectors, and contact points without damaging delicate components.

• Precision blades in 8mm | 10.4mm | 14mm widths.
• 0.5mm blade thickness
• 30mm blade length (fitted into a 142mm overall tool body)

A professional quality industrial thermometer that can read up to 850 degrees celsius.

This thermometer is designed for industrial use and is not suitable for body temperature measurement.

• Automatic data hold / max temp display
• Battery included
• -50 to 850 degree C range

This infrared thermometer probe is compatible with most multimeters, clamp meters etc, including the ET2604. Ideal for applications where the object being measured cannot be touched.

• 8:1 distance to spot size ratio
• Built in laser pointer
• Being in analogue output of 1 mV/degree C
• -30 to 550 degree C temperature range
• 9V battery (supplied)

The Power Probe Temperature Kit is designed to give readings for ambient temperature and from the wireless Temperature Probe.

The Tempkit has a built-in temperature sensor in the base unit, plus a temperature sensor in the remote wireless Probe. This allows for multiple readings simultaneously.

One additional wireless Temperature Probe (TEMPPROBE) is available separately, for a second temperature reading.

• Measuring Range: -22°C to 70°C
• Wireless Transmitter Distance: 5m (16.5 Feet)
• Accuracy ±2.0°F(±2.0°C)
• Backlit LCD Display
• Requires 2x AA and 2x AAA Batteries (NOT INCLUDED)

Additional wireless probe accessory for use with the PowerProbe wireless temperature kit. This probe allows for a third zone temperature reading.

• 2x AAA batteries included
• For use with ETTEMPKIT

The Endeavour ET2024R is a compact, high-performance thermometer designed specifically for automotive and HVAC professionals. Featuring a 110mm foldable stainless steel probe, it delivers fast and accurate temperature readings across a wide range from -50¡C to 300¡C.

• Rechargeable Battery - say goodbye to button batteries with simple USB Type-C charging
• Fast checking of vent temperatures
• Large backlit display - easy to read in low-light environments
• IP65 waterproof

K type temperature probe for use with multimeters that support a temperature function.