Ford Rear Hub Nut Socket

Transit (2014>)
SKU: ET1845A

Automotive


A special 4 pin impact socket for removing the rear hub nut on RWD Ford Transit (>2014). The alignment shaft allows accurate location onto the castellated nut.

  • 19mm hex drive
  • 6.8mm stud width
  • Outer rim: 69.5mm
  • OEM Equiv: 205-1007

205-1007

SKU ET1845A
Barcode # 9321280403994
Brand Automotive
Shipping weight 1.3000kg
Vehicle Make Ford

12 Months


Others also bought


Brake Caliper Socket

Brake Caliper Socket

10 Point impact socket for brake caliper service on Porsche vehicles. Part of the Endeavour Tools range of brake caliper bits / sockets.

  • 10 Pt impact socket
  • 11.5mm dia (measured from inside wall of the socket)
  • 50mm overall length
  • 1/2" Sq Drv

Truck Oil Filter Wrench

Truck Oil Filter Wrench

This truck oil chain filter wrench has a head design that allows you to turn in either direction without removing the wrench.

  • 24" chain length
  • Fits diameter: 75 - 150mm

Hub Nut Socket | 56mm | Deep

Hub Nut Socket | 56mm | Deep

A specialised bi-hex deep socket that is commonly used on Ford Transit 130 | 150 | 190 vehicles (1993 onwards) and swing arm / axle nuts on Ducati / Augusta motorcycles.

  • 56mm dia | 12 Point
  • 3/4" Sq Drv

Caliper Brake Pad Socket

Caliper Brake Pad Socket

A specialised caliper brake pad impact socket for Audi / Porsche vehicles. This socket has 10 points/

  • Applications: Audi A8 | S6, Porsche Cayenne
  • 20mm dia | 10 Point
  • 1/2" Sq Drv

Hub Nut Socket | 65mm | Deep Hub Nut Socket | 65mm | Deep

Hub Nut Socket | 65mm | Deep

A thin wall hub nut socket designed to suit many applications, including 65mm Ford Transit rear hubs (before 1993).

  • Size: 65mm (2-9/16")
  • 6 point (single hex)
  • 3/4" Sq Drv


More from this category


Front Hub Nut Socket

Front Hub Nut Socket

Specialised front hub nut socket for servicing the front hub lock nut on Toyota 2WD trucks (07-). The socket has 8 pins, and is designed for use with impact tools.

  • 3/4" Sq Drv
  • OEM Equiv: 09318-12010 8 Pin
  • Applications: 4Runner (07-14) | Sequoia (08-14) | Tundra (07-14)

Hub Nut Socket Hub Nut Socket

Hub Nut Socket

An extra long thin wall socket for deeply recessed hub nuts. Also suitable for adjusting the free play in wheel bearings on Landcruiser / Nissan Patrol.

This socket is turned by inserting a tommy bar or large screwdriver through the cross drilled holes at the opposite end to the hexagonal head.

  • 54mm dia | 6 Pt
  • 165mm depth | 180mm OL
  • Applications: Landcruiser 40/60/70/80/100 Series | Nissan Patrol Y60/GQ/MQ/MK.
  • 1/2" Sq Drv

Hub Nut Socket

Hub Nut Socket

For front wheel adjusting nuts on Landcruiser 40 | 60 | 70 | 80 | 100 Series

  • 55mm | 6 Point hex
  • 85mm depth
  • Thin wall
  • 1/2" Sq Drv

Hub Nut Socket | 40mm | Deep

Hub Nut Socket | 40mm | Deep

A specialised 6 point deep impact socket suitable for use on hub nuts on Peugeot vehicles.

  • 40mm diameter | 6 Point
  • Deep impact socket
  • 1/2" Sq Drv

Hub Nut Socket | 52mm | Deep Hub Nut Socket | 52mm | Deep

Hub Nut Socket | 52mm | Deep

Part of the Endeavour specialist impact socket range. This 6 point socket has specific application for use with most Land Rover vehicles.

  • 52mm diameter
  • 6 point impact socket
  • 1/2" Sq Drv

Hub Nut Socket | 56mm | Deep

Hub Nut Socket | 56mm | Deep

A specialised bi-hex deep socket that is commonly used on Ford Transit 130 | 150 | 190 vehicles (1993 onwards) and swing arm / axle nuts on Ducati / Augusta motorcycles.

  • 56mm dia | 12 Point
  • 3/4" Sq Drv