Adjustable jaw design makes these pliers ideal for removing quick connnect, snap / side lock couplers on a wide range of vehicles.
SKU | ET1614 |
Barcode # | 9321280419735 |
Brand | Automotive |
Product weight | 0.2800kg |
Shipping weight | 0.280000kg |
Vehicle Make | Universal |
12 Months
Others also bought
Air / Hand Powered Fluid Extractor
A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.
An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.
- Massive 10L capacity avoids the need to remove drain plugs etc
- Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)
ET1798-CLIP Promo
Transfer Syringe
A convenient transfer syringe with a 1.5 litre capacity, and 400mm extension tube.
This syringe is made from a high quality plastic that is resistant to most workshop fluids. The NBR seals supplied with this unit are designed for oil recovery, and should not be used with brake fluid (or other corrosive fluids like petrol / diesel).
- Robust plastic construction
- Transparent design
- Dual NBR seals
D-Sub Deutsch Crimper
An essential tool for Harley & Caterpillar mechanics.
This tool crimps round barrel contacts, pins and sockets. A built in locator ensures accurate positioning on the pin and socket, for a perfect crimp.
Adjustable pin height locator.
- D-Sub Deutsch 4 way indent crimper
- 0.5-4mm2 | AWG 20-12
D-Sub Deutsch Crimper
This 4 way indent crimper crimps pins, round barrel contacts and sockets. A built in locator ensures accurate positioning of the pin & socket before crimping.
An Essential tool for Caterpillar, Kenworth & Harley mechanics
- Application: AWG 26-20, RS232 D-Sub 35-465
- Full cycle ratchet ensures a high quality, consistent crimp
- Adjustable pin height locator
VAG Brake Caliper Socket Set
An essential set of popular sizes of brake caliper sockets used on Audi / VW / Porsche vehicles.
These sockets are specialised 7 Point & 10 Point sockets with a range of different diameters (which are measured from the inside rim of the sockets).
- 9mm | 10 Point - Audi Q7 / Touareg / Porsche
- 11.5mm | 10 Point - Porsche
- 14mm | 7 Point - Audi Q7
- 15mm | 10 Point - Audi Q7 / Porsche
- 20mm | 10 Point - Porsche Cayenne
- 22mm | 7 Point - Audi S5
Electrical Disconnect Pliers
Updated version with 'serrated' tip for better grip. Designed for disconnecting automotive electrical connectors while avoiding damaging locking tabs.
- Spring loaded, for easy use
- Ergonomic molded handles for comfortable use
- Serrated tip
- 215mm overall length
More from this category
A/C & Fuel Line Disconnect Set
For press type disconnection clips on Chrysler, Ford, Holden etc.
- Fuel line: 5/16” & 3/8”
- Air con: 3/8” | 1/2" | 5/8 ” | 3/4"
Diesel Priming Kit
Special kit for inline connection into low pressure fuel delivery systems, for bleeding / priming.
- Six connectors: Holden | Renault | Fiat | Ford | PSA (8mm & 10mm)
- Clear pipes allow air bubbles to be seen
Ford Fuel Line Disconnect Tool
A time saving tool for disconnecting fuel lines on Ford vehicles that use metal push fit type connectors. These connectors require collets from this tool to push up inside the connector, to allow separation (rather than using buttons).
- Suitable for use on many Ford EFI / direct injection petrol / TDCI diesel engines
- Engines: 1.0L Duratec (GDi) | 1.0L EcoBoost | 1.5L EcoBoost | 1.8L & 2.0L Duratec-HE | 2.0L TDCI (DW10F)
- Sizes: 5/16" (8mm) | 3/8" (10mm)
- OEM Equiv: 310-317 | CH-50637
Ford Heater Hose Disconnect Tool
Disconnects heater hose on 2.0L EcoBoost engines in Focus (12-16) | Escape | Kuga (13-16). Fittings are close to firewall behind the engine, and hard to remove without this tool.
- Made from heavy duty nylon
Fuel & Air Conditioning Disconnect Kit
Comprehensive set for separating quick disconnect couplings used in automotive air conditioning hoses, air and fuel lines.
Almost universal application across Asia, European and US vehicles.
- 6 aluminium tools for disconnecting air conditioning and fuel lines, sizes: 5Ú16 , 3Ú8 , 1Ú2 , 5Ú8 , 3Ú4", 7Ú8"
- 7 tools for disconnecting spring lock couplings on Ford / Holden / Chysler air conditioning and fuel lines, sizes 1Ú4 , 5Ú16 , 3Ú8 , 1Ú2 , 5Ú8 , 3Ú4", 7Ú8
Fuel Feed Disconnect Pliers
For quick release connections on later model (06 onwards) Commodore,GM, Fiat,VW etc.
- 195mm overall length