A specialised kit for removing injectors on Mercedes CDI engines. This kit avoids having to disassemble the cylinder head.
- Applications: C-Class | E-Class | Sprinter
- Engine codes: 611 | 612 | 613 | 646 | 647 | 648 (does not suit 642)
- M16 x 1.5 thread
Mercedes Injector Nozzle Puller | 12mm
Designed specifically for Mercedes CDI diesel engines, this 12mm injector nozzle puller is an essential tool for safely and efficiently extracting fuel injector nozzles without damaging surrounding components.
- Engine codes: OM611 | OM612 | OM613 | OM646 | OM647 | OM648
- M12 prong width
- M16 x P1.5 thread
Mercedes Injector Nozzle Puller | 12mm
Designed specifically for Mercedes CDI diesel engines, this 12mm injector nozzle puller is an essential tool for safely and efficiently extracting fuel injector nozzles without damaging surrounding components.
- Engine codes: OM611 | OM612 | OM613 | OM646 | OM647 | OM648
- M12 prong width
- M16 x P1.5 thread
| SKU | ET1299B |
| Barcode # | 9321280350403 |
| Brand | Automotive |
| Product weight | 3.4100kg |
| Shipping weight | 3.410000kg |
| Vehicle Make | Mercedes |
12 Months
Calculate Shipping
Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
Others also bought
Pneumatic Diesel Injector Puller Kit
Air powered, simply requiring regulated working pressure of 5-8 bar (<100 l/min).
Australia's most comprehensive adaptor kit (24 pce) to suit Bosch, CAT, Cummins, Denso, Delphi, Siemens ...
- Revolutionary! Vibratory hammer action slashes removal time.
More from this category
17T Hydraulic Injector Extractor Kit
A specialised kit that assists with the extraction of very tight fitting injector nozzles, utilising a special pull spindle. Contains a 17T hydraulic ram, with 15mm stroke. Height retracted 89mm | extended 104mm.
This kit is designed to be used with a bridge, and injector pullers. These are available separately.
- M14 x 1.5 pitch Pulling Spindle 240mm long.
- M14 x 1.5 pitch Pulling Spindle 315mm long.
- M17 x 1.0 pitch Pulling Spindle 240mm long.
- M17 x 1.0 pitch Pulling Spindle 315mm long.
- M18 x 1.5 pitch Pulling Spindle 315mm long.
- M25 x 1.0 pitch Pulling Spindle 240mm long.
BMW Diesel Injector Removal Kit
A specialised kit for removing BMW diesel injectors in vehicles with M47 | M57 engines, without having to remove the cylinder head.
The special extraction bridge and pull spindle allows for quick / safe injector removal.
To avoid the risk of impurities entering the combustion chamber during the cleaning process, we strongly suggest the use of a compressed air adaptor.
- Engine codes: M47TU | M57 | M57TU
- Spindle 16 (one side M17) for mounting in the injector
- 29mm socket for disassembling the electric unit
- Internal 6 Pt wrench for removing the injector needle
BMW N47 / N57 Injector Removal Master Kit
A specialised kit for removing seized diesel injectors from VAG TDI engines, along with BMW N47 | N57 engines. The removers have a special two jaw design to fix the injector and pull out with a sllide hammer.
- Engine codes: BMW N47 | N57, VAG ALH | ALU | 1Z
- OEM Equiv: T10055 | T10402 | T10415 | T10163 | T40055
BMW N55 Injector Removal Tool
A specialised tool for late model BMW N55 petrol engines to safely / quickly install / remove the fuel injectors. For earlier N55 engines (before July 2013) please refer to ET1539A.
- Application: BMW 3.0L (2008 - 2016)
- Engine: N55 (from July 2013 onwards) - up to engine # 14407684
- OEM equiv: 130270 (13 0 270)
Bosch / Lucas Diesel Injector Puller
Kit consists of a slide hammer with adaptors to assist the removal of stubborn Bosch and Lucas diesel injectors.
- Adaptors: M8 P0.75 (male) | M12 P1.5 (Bosch) | M14 x P 1.5 (Volvo / Scania)
- Slide hammer thread: M12 | 175mm length (without adaptors).
Bosch Injector Removal Kit
Specialised kit for demounting stuck injectors (mainly Bosch) without removing the cylinder head. Wide coverage on 1.3L - 2.2L diesel engines.