Great value auto ranging True RMS multimeter. Highly accurate, easy to use. 6,000 counts display. Measures current up to 10A.

• Includes temperature probe
• 2x AAA batteries included

Connects to any Power Probe circuit tester, limiting output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles.

Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

• Current limited 5V output
• Safely test computer sensor circuits
• Provides 5V reference voltage
• 12 - 24V input
• 5V output
• Standard 4mm banana connector

Advanced detector using ultrasonic waves to detect leaks in a range of automotive / industrial applications. Tone generator to check for faulty seals in non pressurised enclosures.

• Detect vacuum / compressed air leaks (down to .13mm)
• Gas turbulence / with air / gas line blockages
• Electrical discharge due to insulation breakdown
• Mechanical wear in bearings, race assemblies etc
• Detect leaks in door seals, vehicle compartments etc

A specialised oil funnel for Ford / Mazda vehicles that connects directly to the oil filler neck, eliminating the risk of unsafe oil spills.

Also fits Citroen Jumper, Fiat Ducato and Peugeot Boxer vehicles.

• 33.5mm diameter connector.
• Engine oil bottles can be put in upside down on the funnel, allowing for hands free / single person operation.
• Large oil passage allows for faster oil flow.
• Lower transparent chamber shows progress of oil flow into engine.

This kit is designed to remove high security BMW wheel lock bolts with spinning rings, where the bolt cannot be removed because the key is missing, or the bolt is rounded etc.

A faster solution than grinding / drilling, which is also more likely to result in damage to the wheel.

This kit allows the wheel lock bolt to be removed in a few minutes. A real timing saving tool!

• Slide hammer: M16 x 1.5

Specialised sockets for removing locking wheel nuts where no key is available. Chrome Moly | Impact grade for use with air impact wrenches. MAXIMUM AIR PRESSURE - 90 PSI.

Please note that the removal action will likely distort / damage wheel nuts, and replacement is recommended.

• Deep internal tapered reverse thread
• Suits 19, 21, 22mm wheel nuts (across flats)
• 1/2" Sq Drv
• 2 pce kit

Special inner design grips wheel locks on most cars / SUVs.

• For removal only.
• Do not use with impact tools

Twist removal sockets are designed for aggressively removing worn or rusty nuts. These sockets are for removal only.

Do NOT use with an air powered impact wrench.

• 17mm twist socket
• 50mm overall length
• 1/2" Sq Drv

Twist removal sockets are designed for aggressively removing worn or rusty nuts. These sockets are for removal only.

Do NOT use with an air powered impact wrench.

• 19mm twist socket
• 50mm overall length
• 1/2" Sq Drv