Combination Budd wheel nut socket with dual hex / square sizing. Extra deep design for removal of nut / stud. Impact grade for use with impact wrenches.

• Budd wheel nut socket
• 17mm square (4Pt) x 35mm hex
• Impact grade (Chrome Moly)
• 3/4" Sq Drv

Connects to any Power Probe circuit tester, limiting output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles.

Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

• Current limited 5V output
• Safely test computer sensor circuits
• Provides 5V reference voltage
• 12 - 24V input
• 5V output
• Standard 4mm banana connector

Replacement cutters for use with ET6066. These cutters mould to the shape of the wheel nut, allowing for their removal. Universal application.

• 5 pack

This kit is designed to remove high security BMW wheel lock bolts with spinning rings, where the bolt cannot be removed because the key is missing, or the bolt is rounded etc.

A faster solution than grinding / drilling, which is also more likely to result in damage to the wheel.

This kit allows the wheel lock bolt to be removed in a few minutes. A real timing saving tool!

• Slide hammer: M16 x 1.5

Twist sockets for removing damaged / rusted on hub nut sockets. Includes 24mm for Commodore hub nuts.

These twist sockets are for removal only, and will damage the wheel nut being removed. These twist sockets should NOT be used with air powered impact wrenches.

• 17 | 19 | 21 | 22 | 24 | 27mm
• 1/2" Sq Drv

Specialised sockets for removing locking wheel nuts where no key is available. Chrome Moly | Impact grade for use with air impact wrenches. MAXIMUM AIR PRESSURE - 90 PSI.

Please note that the removal action will likely distort / damage wheel nuts, and replacement is recommended.

• Deep internal tapered reverse thread
• Suits 19, 21, 22mm wheel nuts (across flats)
• 1/2" Sq Drv
• 2 pce kit

Special inner design grips wheel locks on most cars / SUVs.

• For removal only.
• Do not use with impact tools

Twist removal sockets are designed for aggressively removing worn or rusty nuts. These sockets are for removal only.

Do NOT use with an air powered impact wrench.

• 17mm twist socket
• 50mm overall length
• 1/2" Sq Drv