Remove Spinning Wheel Locks In Minutes
This kit is designed to remove high security BMW wheel lock bolts with spinning rings, where the bolt cannot be removed because the key is missing, or the bolt is rounded etc.
A faster solution than grinding / drilling, which is also more likely to result in damage to the wheel.
This kit allows the wheel lock bolt to be removed in a few minutes. A real timing saving tool!
- Slide hammer: M16 x 1.5
| SKU | ET6064 |
| Barcode # | 9321280403673 |
| Brand | Automotive |
| Product weight | 3.9000kg |
| Shipping weight | 3.900000kg |
| Vehicle Make | BMW |
12 Months
Calculate Shipping
Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
Others also bought
Push Tab Electrical Disconnect Pliers
Specialised electrical disconnect pliers for push tab fittings commonly used on Fuel Injectors, Ignition Coils, Mass Airflow Sensors etc.
- Long length swivel jaws provide access to deep seated / hard to reach connectors
- Applications include Fiat | Mercedes | VAG
Endeavour Pin Fit Master Kit
This tool is used to check for proper pin-fit and tension on US, European and Asian automotive electrical female terminals. This tool covers Japanese and Korean built vehicles including, Toyota, Honda, Mitsubishi, Mazda, Nissan, Subaru, Suzuki, Isuzu, Kia and Hyundai vehicles. This tool also covers US joint venture vehicles including Ford / Mazda, GM / Toyota, Ford / Nissan, and GM / Suzuki.
The tool is precision manufactured in the US. The tool has looped wires that are colour coded and the colour code chart is located on the packaging. The tool meets all RoHS requirements for all of the components and the finished product.
A must-have tool to properly diagnose electrical and electronic concerns on all common makes and models.
- Colour coded
- Made in USA
- Check socket fit condition
Brake Fluid Tester (DOT / ENV)
This pen-style tool tests the percentage of water in brake fluid and evaluates key chemical profiles essential for modern brake fluids. The updated version now supports five fluid typesÑcovering both traditional DOT variants and ENV (Bosch). Ideal for quick and reliable brake fluid checks.
- Colour coded LEDs indicate percentage of water in the brake fluid
- Compatible with DOT 3 | DOT 4 | DOT 5.1 | ENV4 (Bosch) | ENV6 (Bosch)
- Not suitable for silicone-based DOT 5.0
- AAA Battery included
More from this category
Car Twist Removal Socket Set (7 Pce)
Twist sockets for removing damaged / rusted on hub nut sockets. Includes 24mm for Commodore hub nuts.
These twist sockets are for removal only, and will damage the wheel nut being removed. These twist sockets should NOT be used with air powered impact wrenches.
- 17 | 19 | 21 | 22 | 24 | 27mm
- 1/2" Sq Drv
Locking Wheel Nut Removal Sockets (2 Pce)
Specialised sockets for removing locking wheel nuts where no key is available. Chrome Moly | Impact grade for use with air impact wrenches. MAXIMUM AIR PRESSURE - 90 PSI.
Please note that the removal action will likely distort / damage wheel nuts, and replacement is recommended.
- Deep internal tapered reverse thread
- Suits 19, 21, 22mm wheel nuts (across flats)
- 1/2" Sq Drv
- 2 pce kit
Toyota Wheel Lock Removal Socket
Special inner design grips wheel locks on most cars / SUVs.
- For removal only.
- Do not use with impact tools
Twist Removal Socket | 17mm
Twist removal sockets are designed for aggressively removing worn or rusty nuts. These sockets are for removal only.
Do NOT use with an air powered impact wrench.
- 17mm twist socket
- 50mm overall length
- 1/2" Sq Drv
Twist Removal Socket | 19mm
Twist removal sockets are designed for aggressively removing worn or rusty nuts. These sockets are for removal only.
Do NOT use with an air powered impact wrench.
- 19mm twist socket
- 50mm overall length
- 1/2" Sq Drv