This handy wall mount clip is supplied as a BONUS with our 1.5L fluid transfer syringe.

EPDM seals for ET1798 fluid transfer syringe. These EPDM seals are compatible with brake fluid. These are different seals to the standard seals supplied with the ET1798 syringe.

For oil, use NBR seals (ET1798-NBR)

• Compatible with brake fluid
• 2 piece set

A replacement seal kit for the ET1798 transfer syringe.

These are the same seals as supplied with the ET1798 unit. These are designed for use with oil, and are not suitable for brake fluid.

For EPDM seals refer ET1798-EPDM.

• NBR seals
• 2 piece set

Measures Visual Light Transmission (VLT) through windows treated with aftermarket window tint film. Each probe has a magnet that will hold against the glass for measurement.

• Two piece design allows users to check all windows on vehicle, including all fixed windows.
• Essential testing tool for vehicle inspections.
• 4x AAA batteries included.

An essential set of 18 keys for draining sumps, axles, gearboxes, differentials etc. 3/8" Sq Drv.

• Hex: 8, 9, 10, 12, 14, 17mm
• Square: 7, 8, 10, 11, 12, 13, 14mm
• Square: 5/16" (male), 3/8" (male) | 10mm (female)
• Spline (Sec): M16
• Triangular: 10mm

A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

Soda blasting delivers a fast, powerful, and non abrasive way to remove paint, carbon buildup, surface rust, and more - making it an ideal choice for anyone who wants professional quality results without the risk of damage. Unlike harsher blasting methods, soda media won’t heat or distort sheet metal and is gentle enough to clean around glass, rubber, and plastic with confidence. Bicarbonate soda media is eco friendly, clean to use, and safe, making it perfect for workshops, restorers, and DIY users alike. As with any blasting process, airborne dust can be harmful if inhaled, so always use P2 respirator protection, along with suitable eye, face, and hearing protection.

The Air Boy soda blaster is designed for small jobs, and features a specially designed nozzle that does not require adjustment. For optimal performance, pair this kit with an air compressor rated at 180 L/min or higher, and install a water trap to ensure smooth, uninterrupted media flow. Replacement soda media (124320100) is readily available, so you can keep blasting without downtime.

• Precision Engineered Nozzle for Consistent Results - delivers an accurate, controlled blasting stream with no manual adjustments needed, ensuring smooth operation and professional quality finishes every time.
• Optional Wide Pattern Nozzles for High Speed Coverage
  - Compatible with wider nozzles (sold separately), allowing users to increase surface coverage and reduce blasting time—perfect for larger jobs or workshop efficiency.
• Mandatory Use of P2 Respiratory Protection - always wear P2 rated respiratory protection to safeguard against fine airborne particles during use, ensuring safe operation in workshop and on site environments.
• Supplied with 1kg of bonus sodablasting media to get you started. Use with a 180L / min or higher air compressor for optimal results.

A multipurpose fluid syringe ideal for the transfer of brake fluid, and other fluids from components such as differentials / gearboxes.

This syringe is fitted with EPDM seals which are designed for brake fluid. NBR seals are available as an option for oil transfer.

We supply these syringes with a BONUS wall mount.

• 200ml capacity
• Robust plastic construction
• Transparent design
• Dual seals

Wire piercing probes for use with low voltage DC circuits.

• Black / red colours
• Suitable for use with standard 4mm multimeter connectors
• Current rating: 10 Amps

A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

An optional hose to use with the ET3586 fluid extractor. Converts our fluid extractor into a suction brake bleeder, with the benefit of a large 10L tank.

• Use with ET3586 fluid extractor
• 420mm length

A great tool for extracting surplus diesel when disconnecting the fuel filter. And then to reinsert diesel to prime diesel fuel filters after replacement. Supplied with quick release connectors to suit most vehicles.

• Transparent design | Rotative switch off
• Adaptors: male 5/16" | 3/8" male, female 5/16" | 3/8"
• 1.5 litre capacity

A multipurpose fluid syringe ideal for the transfer of brake fluid, and other fluids from components such as differentials / gearboxes.

This syringe is fitted with EPDM seals which are designed for brake fluid. NBR seals are available as an option for oil transfer.

We supply these syringes with a BONUS wall mount.

• 200ml capacity
• Robust plastic construction
• Transparent design
• Dual seals

Next gen rechargeable pump for transferring a wide variety of workshop fluids, including DEF / Adblue.

• 2900mAh lithium battery can discharge up to 300 litres. Recharge using USB cable.
• Adjustable telescopic suction tube (380-520mm)
• Suitable fluids include Antifreeze, Windshield fluid, Kero, Diesel, AdBlue & oils (up to ISO 32). Do not use with Acids, Acetone, Petrol.

An easy and safe solution for transferring fluids, especially media which is unsafe for body contact. Draws in & pumps out liquid in a single stroke.

Ideal for fuel oils, mineral oils, synthetic & biological oils, cooling liquids and spirits.

• Rugged aluminium die cast head
• NBR seals (not suitable for use with brake fluid)
• 450ml transfer container
• Supplied with 8 foot of vinyl hose (4 foot with each valve)