Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations - all designed to suit Schrader tyre valves. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

• Clip On tyre chuck
• 1/4" BSP female inlet
• Sealing type

Make tyre inflation faster, easier, and completely hands free with this Clip-On Chuck with male Schrader Thread.

Designed specifically to complement modern battery powered tyre inflators equipped with a standard female Schrader connector (such as Makita / Milwaukee), this handy accessory transforms your inflator into a more convenient and efficient inflation solution. For a clip on chuck, to suit a traditional tyre inflator with a 1/4" NPT male thread, refer Sonsbeek SKU # 3009403.

Simply screw the male Schrader thread into your inflator's existing female connector, clip the chuck onto the tyre valve, and start inflating. The secure locking mechanism maintains a reliable seal throughout the inflation process, eliminating the need to hold the connector in place manually.

• Ideal Battery Inflator Upgrade - Enhances the usability and convenience of portable cordless compressors, with a female Schrader connector
• Convenient Hands-Free Operation - Securely grips the valve during inflation, allowing you to monitor pressure and operate your inflator with ease.
• Clip On Design - Attaches and releases in seconds without screwing onto the valve.
• Male Schrader thread
• Non Sealing

This fuel filter wrench is designed specifically for the newest 2.4L diesel variants of GWM vehicles.

• Engine codes: GW4D20M, GW4D24
• Applications: GWM Cannon | Cannon Alpha | Tank 300 | Cannon XSR
• For OEM filter: 1111402XED96

Ajax sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Ajax sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

• 1/4" BSP female inlet
• Clip On connector
• Sealing type chuck

Replacement chuck head assembly for the Sonsbeek 3103000 driveway tyre inflator.

A head repair kit for the Sonsbeek 3103000 tyre inflator.

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

• Hold On tyre chuck
• 1/4" BSP female inlet
• Sealing type

Sonsbeek non sealing type tyre chucks are designed to be used when the chuck is to be connected to a tyre inflator / gauged airline.

Our non sealing type chucks will not seal the chuck opening when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek non sealing type chucks are available in a range of different configurations. Where the chuck is to be connected directly to an airline, a sealing type chuck should be used.

Large bore head is designed for use with earthmoving vehicles.

• 1/4" BSP female connector
• Single straight large bore chuck
• Non sealing type

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

Large bore chucks are designed for use with earthmoving vehicles.

• 1/4" BSP female connector
• Single straight large bore chuck
• Sealing type