The Sonsbeek 3103000 Tyre Inflator is a high-quality analogue driveway inflator designed for accurate tyre inflation. It features a pressure range of 0-160 PSI, a die-cast aluminium body, and a steel operating lever with an impact absorbing bumper. The inflator is built for durability and precision, making it ideal for both professional and personal use.

• Inlet size: 1/4" BSP
• Measurement range: 0 - 160 PSI
• Linear gauge with magnifying window

You can't go past Sunflag when looking for professional quality clip removers. Made in Japan, these clip removers - the set comes with two clip removers - are made from special hardened steel to provides years of reliable use. For damage free removal of trims and clips.

• Hardened shafts
• Jaw openings: 5-7mm & 6-9mm

The Sonsbeek 3103000 Tyre Inflator is a high-quality analogue driveway inflator designed for accurate tyre inflation. It features a pressure range of 0-160 PSI, a die-cast aluminium body, and a steel operating lever with an impact absorbing bumper. The inflator is built for durability and precision, making it ideal for both professional and personal use.

• Inlet size: 1/4" BSP
• Measurement range: 0 - 160 PSI
• Linear gauge with magnifying window

OE level functionality for Heavy Duty Truck, Agricultural & Industrial applications.

• Heavy, Medium & Light Duty truck coverage for all major Australia / Asian / European / US manufacturers, including Volvo & Iveco
• J1939 / J1708 and OBDII Protocols covered
• Agriculture / Industrial coverage includes Caterpillar, John Deere, Komatsu.
• Full Mercedes Sprinter coverage
• Perform DPF Regeneration; NOX Resets, Injector Programming, Change and Set Parameters, along with SCR/DEF coverage and full bi-directional controls covering over 60 manufacturers.
• Easy updates via WiFi
• IP65 rating | water resistant
• Remote diagnostics via TeamViewer
• Powerful 1.8GHz quadcore processor
• Includes: Multiple connectors, docking station
• Local Australian support
• Global coverage
• Bus, Commercial, Agriculture, Off Highway
• Free initial remote training consultation post purchase
• Australian based technical support only a phone call away
• We regularly test local Australian vehicles for any updates required
• Regular updates & bug fixes (rather than waiting for bi yearly fixes)
• 2 years free updates for all vehicle categories (a $2,800 value)
• No lock out once updates expire
• 4G Sim Card enabled
• Light Commercial now includes: Toyota Hilux / Landcruiser, Ford Ranger, Nissan Navara / Patrol, Isuzu D-Max, Holden Colorado

Coverage from Commercial to and including DPF regeneration

Testing brake fluid boiling point is widely regarded as the most accurate method of testing brake fluid moisture levels.

This compact unit tests DOT3 | DOT4 | DOT5 | DOT5.1.

• LCD display provides step by step instructions
• Accurate results displayed in less than sixty seconds.
• Operates on 12V supply, using vehicle's battery

Ajax sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Ajax sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

• 1/4" BSP female inlet
• Clip On connector
• Sealing type chuck

A head repair kit for the Sonsbeek 3103000 tyre inflator.

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

• Hold On tyre chuck
• 1/4" BSP female inlet
• Sealing type

Sonsbeek non sealing type tyre chucks are designed to be used when the chuck is to be connected to a tyre inflator / gauged airline.

Our non sealing type chucks will not seal the chuck opening when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek non sealing type chucks are available in a range of different configurations. Where the chuck is to be connected directly to an airline, a sealing type chuck should be used.

Large bore head is designed for use with earthmoving vehicles.

• 1/4" BSP female connector
• Single straight large bore chuck
• Non sealing type

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

Large bore chucks are designed for use with earthmoving vehicles.

• 1/4" BSP female connector
• Single straight large bore chuck
• Sealing type

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

• 10" long
• 1/4" BSP female connector
• Straight chuck to get deeper into the wheel