The Sonsbeek truck tyre inflator is designed to reliably inflate truck tyres up to 220 PSI. The inflator has a large 90mm dial gauge for easy reading. The unit is designed for inflation, deflation and measurement.

The inflator is designed for rugged applications, and is supplied with a rubber impact protector on the gauge, rubber grip on the chuck, and a pressed steel lever.

One button operation

• 90mm dial for easy reading
• 220 PSI scale
• 1m hose length
• Rubber gauge protector

Ajax sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Ajax sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

• 1/4" BSP female inlet
• Clip On connector
• Sealing type chuck

Replacement chuck head assembly for the Sonsbeek 3103000 driveway tyre inflator.

A head repair kit for the Sonsbeek 3103000 tyre inflator.

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

• Hold On tyre chuck
• 1/4" BSP female inlet
• Sealing type

Sonsbeek non sealing type tyre chucks are designed to be used when the chuck is to be connected to a tyre inflator / gauged airline.

Our non sealing type chucks will not seal the chuck opening when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek non sealing type chucks are available in a range of different configurations. Where the chuck is to be connected directly to an airline, a sealing type chuck should be used.

Large bore head is designed for use with earthmoving vehicles.

• 1/4" BSP female connector
• Single straight large bore chuck
• Non sealing type
• Working pressure: 175 PSI

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

• 10" long
• 1/4" BSP female connector
• Straight chuck to get deeper into the wheel