OE level functionality for Heavy Duty Truck, Agricultural & Industrial applications.

• Heavy, Medium & Light Duty truck coverage for all major Australia / Asian / European / US manufacturers, including Volvo & Iveco
• J1939 / J1708 and OBDII Protocols covered
• Agriculture / Industrial coverage includes Caterpillar, John Deere, Komatsu.
• Full Mercedes Sprinter coverage
• Perform DPF Regeneration; NOX Resets, Injector Programming, Change and Set Parameters, along with SCR/DEF coverage and full bi-directional controls covering over 60 manufacturers.
• Easy updates via WiFi
• IP65 rating | water resistant
• Remote diagnostics via TeamViewer
• Powerful 1.8GHz quadcore processor
• Includes: Multiple connectors, docking station
• Local Australian support
• Global coverage
• Bus, Commercial, Agriculture, Off Highway
• Free initial remote training consultation post purchase
• Australian based technical support only a phone call away
• We regularly test local Australian vehicles for any updates required
• Regular updates & bug fixes (rather than waiting for bi yearly fixes)
• 2 years free updates for all vehicle categories (a $2,800 value)
• No lock out once updates expire
• 4G Sim Card enabled
• Light Commercial now includes: Toyota Hilux / Landcruiser, Ford Ranger, Nissan Navara / Patrol, Isuzu D-Max, Holden Colorado

Coverage from Commercial to and including DPF regeneration

Heavy duty digital inflator for accurate and reliable tyre pressure maintenance on trucks, buses, and other commercial vehicles. Built for workshop and fleet service use, the inflator combines a robust construction with dependable pressure measurement to withstand demanding operating conditions.

Designed for use with compressed air systems, this tyre inflator allows quick inflation and controlled deflation for precise pressure adjustment. Aluminium die cast construction.

• Dual scale: 0-300 PSI / 20 Bar
• 600mm flexible hose
• Dual chuck

Ajax sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Ajax sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

• 1/4" BSP female inlet
• Clip On connector
• Sealing type chuck

Replacement chuck head assembly for the Sonsbeek 3103000 driveway tyre inflator.

A head repair kit for the Sonsbeek 3103000 tyre inflator.

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

• 1/4" BSP female connection
• Brass construction

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

Large bore chucks are designed for use with earthmoving vehicles.

• 1/4" BSP female connector
• Single straight large bore chuck
• Sealing type

Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.

Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.

Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.

• 10" long
• 1/4" BSP female connector
• Straight chuck to get deeper into the wheel