A specialised cylinder head rebuilt kit designed to allow the camshafts to be correctly fitted into the cylinder head on Porsche / VAG common rail engines.

The set contains a jig, various camshaft support fixtures, gear tooth alignment clamps and locking devices.

• OEM Equiv: T40094 | T40095 | T40096
• Applications: VAG 1.6L | 2.0L | 2.7L | 3.0L | 4.0L | 4.2L diesel CR engines | Porsche 3.0 TDi
• For timing servicing on 2.7L - 4.2L engines, also refer ET1622.

This cup style oil filter wrench is part of the Endeavour Tools range of specialty oil filter wrenches. We provide oil filter wrenches to suit most common oil filters.

• 96mm dia x 18F
• Engine: V10 TDi
• Application: VW Touareg

Specialty cam locking bar for 24V VR6 engines used on some GTI, GLI and all 3.2 liter VR6. Also W8 and W12 engines (two needed). Locks both camshafts at TDC for setting valve timing. Not for 12V VR6, nor any 2.7L, 2.8L or 3.0L conventional V6 engines.

• Engine codes: 2.8L (BDE) (BDF), 3.2L (BAA) (BJS) (BMX) (BUB), 3.6L (BHK) (BHL) (BLV)
• Application: Audi A3 (06-09) | A8 (05-09) | Q7 (07-09) | TT (04-09), VW CC (06-09) | EOS (07-09) | Golf (04) | GTI (02-06) | Phaeton (04-06) | R32 (04-08) | Touareg (04-09)

This useful kit is designed for locking the fuel pump into its timed position so that the pump drive belt can be replaced or the pump timing checked.

This kit is designed for 2.7L | 3.0L TDi engines.

• Applications: Audi A4 (07-12), A5 (07-12), A6 (08-11) | Q5 (08-12), Q7 (07-12), VW: Phaeton (07-15), Touareg (07-11) | Porsche: Cayenne (08-16)
• Engine codes: 2.7L CAMA, CGKA, CANA, 3.0L: CCWA, CDYA, CASA, CASD
• OEM Equiv: T40135 | 3242 | T10320 | T40058

A specialised puller for removing the toothed belt pulley from the high pressure pump, in order to enable the removal of the pump. This tool is essential for removing the injection pump.

• Engine: 1.6L | 2.0L TDI
• Application: VW Touareg V6
• OEM Equiv: T40064

A specialised tool to remove the toothed belt drive sprocket on high pressure fuel pumps fitted to VAG 3.0L 6 Cyl 4V diesel engines.

• Applications: Audi A5 | A6 | A8 | Q7, VW Phaeton | Touareg
• OEM Equiv: T10320

Designed for V6 4v common rail diesel, chain driven engines. Used for turning over & positioning the crankshaft during removal & installation of the camshaft timing chain. Also contains crankshaft aligning pins (with flats) & side alignment pins for crankshaft to cylinder head.

• Applications: Audi: A4 | A5 | A6 | A8 | Q7 | Allroad, VW: Phaeton | Touareg, Porsche Cayenne

Specialised kit to assist with checking the alignment of the pump injector unit, and installing o-rings for the pump injector unit.

• Applications: Phaeton & Touareg (03-), & A3 (04-)
• OEM Equiv: T10210 PD injector setting gauge) | T10056 (o-ring tools)

Drive gear wheel adjustment tool for engines with a mechanical vacuum pump. Holds the high pressure vacuum pump drive chain sprocket when adjusting cam / crank timing.

• Engine code: AXZ | BHK | BWS
• OEM Equiv: T10363

The kit is designed for use with 2.5L engines to facilitate removal of the water pump. The manufacturer recommends that the water pump is replaced when removing / replacing the cylinder head.

Companion to ET1469

• Applications: VW T5 | Touareg 2.5D
• OEM Equiv: T10221A | T10225 | T10222A

This timing kit is designed for gear driven engines which utilise the PD fuel injection system.

This kit contains camshaft locking tools, crankshaft locknig tools, a clamping device for servicing the camshaft wheels, a special rotating socket, and tensioner wrench.

• Applications: VW T5 (04-) | Touareg (03-) | Phaeton (03-)
• Engines: 5 cylinder / 10 cylinder 2.5L | 4.9L TDI PD
• OEM Equiv: T10193 | T10199 | T10199/1 | T10225 | T10226 | T10234

A specialised kit for replacing timing chains on Porsche | VAG petrol engines. This kit suits a wide range of 6 | 8 cylinder engines.

• Applications: VW Bora | Eos | Golf Mk IV | Golf Mk V | Passat | Phaeton | Touareg |  | Sharan | Transporter T4 | Transporter T5, Audi A3 | A8 | Q7 | S8 | TT, Porsche Cayenne.
• Engines: 2.8L, 3.2L, 3.6L, 4.0L, with 6 & 8 cylinder petrol engines

Secures the position of the high pressure pump chain drive sprocket on engines without a mechanical vacuum pump.

• Engine codes: AXZ | BHK
• Applications: Touareg (06-10) | Audi Q7 (06-10)
• OEM Equiv: T10332